69 FR 2113, January 14, 2004
DEPARTMENT OF COMMERCE
International Trade Administration
[C-580-835]
Final Results of Countervailing Duty Administrative Review:
Stainless Steel Sheet and Strip in Coils from the Republic of Korea
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
ACTION: Notice of Final Results of Countervailing Duty Administrative
Review.
-----------------------------------------------------------------------
SUMMARY: On September 9, 2003, the Department of Commerce (the
Department) published in the Federal Register its preliminary results
of administrative review of the countervailing duty order on stainless
steel sheet and strip in coils from the Republic of Korea for the
period January 1, 2001 through December 31, 2001 (see Notice of
Preliminary Results of Countervailing Duty Administrative Review:
Stainless Steel Sheet and Strip in Coils from the Republic of Korea, 68
FR 53116 (September 9, 2003) (Preliminary Results)). The Department has
now completed this administrative review in accordance with section
751(a) of the Tariff Act of 1930, as amended (the Act).
Based on information received since the Preliminary Results and our
analysis of the comments received, the Department has revised the net
subsidy rate for INI Steel Company (INI)\1\ and Sammi Steel Co., Ltd.
(Sammi).\2\ As discussed in the ``Issues and Decision Memorandum from
Holly A. Kuga, Acting Deputy Assistant Secretary for AD/CVD Enforcement
II to James J. Jochum, Assistant Secretary for Import Administration
concerning the Final Results of Countervailing Duty Administrative
Review: Stainless Steel Sheet and Strip in Coils from the Republic of
Korea'' (Decision Memorandum) dated January 7, 2004, we found INI and
Sammi to be cross-owned and are therefore calculating a single rate for
both companies. The final net subsidy rate for the reviewed companies
is listed below in the section entitled ``Final Results of Review.''
---------------------------------------------------------------------------
\1\ Formerly known as Inchon Iron and Steel Co. (Inchon). As of
April 2001, Inchon changed its name to INI.
\2\ As of April 2002, Sammi changed its name to BNG Steel Co.,
Ltd. (BNG).
---------------------------------------------------------------------------
EFFECTIVE DATE: January 14, 2004.
FOR FURTHER INFORMATION CONTACT: Carrie Farley or Darla Brown, Office
of AD/CVD Enforcement VI, Group II, Import Administration, U.S.
Department of Commerce, Room 4012, 14th Street and Constitution Avenue,
NW., Washington, DC 20230; telephone: (202) 482-2786.
SUPPLEMENTARY INFORMATION:
Background
On September 9, 2003, the Department published in the Federal
Register its Preliminary Results. We invited interested parties to
comment on the results. Since the preliminary results, the following
events have occurred.
On September 12, 2003, respondents requested an extension for
submission of case and rebuttal briefs. On September 17, 2003,
petitioners\3\ also requested an extension of time for the submission
of case and rebuttal briefs. On September 24, 2003, the Department
revised the briefing schedule, granting petitioners and respondents
until October 17 to file case briefs and October 24 to file rebuttal
briefs. See September 24, 2003 Memorandum to the File, from the Team,
re: Amended Briefing Schedule for the Countervailing Duty
Administrative Review of Stainless Steel Sheet and Strip from Korea. On
October 17, 2003, we received case briefs from petitioners and
respondents. On October 24, 2003, we received rebuttal briefs from
petitioners and respondents.
---------------------------------------------------------------------------
\3\ Allegheny Ludlum, AK Steel Corporation, J&L Speciality
Steel, Inc., Butler-Armco Independent Union, Zanesville Armco
Independent Union, and the United Steelworkers of America, AFL-CIO/
CLC (collectively, petitioners).
---------------------------------------------------------------------------
Pursuant to 19 CFR 351.213(b), this review covers only those
producers or exporters of the subject merchandise for which a review
was specifically requested. Accordingly, this review covers INI and
Sammi. This review covers the period January 1, 2001 through December
31, 2001, and twenty-three programs.
Scope of the Review
For purposes of this review, the products covered are certain
stainless steel sheet and strip in coils. Stainless steel is an alloy
steel containing, by weight, 1.2 percent or less of carbon and 10.5
percent or more of chromium, with or without other elements. The
subject sheet and strip is a flat-rolled product in coils that is
greater than 9.5 mm in
[[Page 2114]]
width and less than 4.75 mm in thickness, and that is annealed or
otherwise heat treated and pickled or otherwise descaled. The subject
sheet and strip may also be further processed (e.g., cold-rolled,
polished, aluminized, coated, etc.) provided that it maintains the
specific dimensions of sheet and strip following such processing.
The merchandise subject to this review is classified in the
Harmonized Tariff Schedule of the United States (HTSUS) at subheadings:
7219.13.00.31, 7219.13.00.51, 7219.13.00.71, 7219.13.00.81,
7219.14.00.30, 7219.14.00.65, 7219.14.00.90, 7219.32.00.05,
7219.32.00.20, 7219.32.00.25, 7219.32.00.35, 7219.32.00.36,
7219.32.00.38, 7219.32.00.42, 7219.32.00.44, 7219.33.00.05,
7219.33.00.20, 7219.33.00.25, 7219.33.00.35, 7219.33.00.36,
7219.33.00.38, 7219.33.00.42, 7219.33.00.44, 7219.34.00.05,
7219.34.00.20, 7219.34.00.25, 7219.34.00.30, 7219.34.00.35,
7219.35.00.05, 7219.35.00.15, 7219.35.00.30, 7219.35.00.35,
7219.90.00.10, 7219.90.00.20, 7219.90.00.25, 7219.90.00.60,
7219.90.00.80, 7220.12.10.00, 7220.12.50.00, 7220.20.10.10,
7220.20.10.15, 7220.20.10.60, 7220.20.10.80, 7220.20.60.05,
7220.20.60.10, 7220.20.60.15, 7220.20.60.60, 7220.20.60.80,
7220.20.70.05, 7220.20.70.10, 7220.20.70.15, 7220.20.70.60,
7220.20.70.80, 7220.20.80.00, 7220.20.90.30, 7220.20.90.60,
7220.90.00.10, 7220.90.00.15, 7220.90.00.60, and 7220.90.00.80.
Although the HTSUS subheadings are provided for convenience and customs
purposes, the Department's written description of the merchandise is
dispositive.
Excluded from the scope of this order are the following: (1) sheet
and strip that is not annealed or otherwise heat treated and pickled or
otherwise descaled, (2) sheet and strip that is cut to length, (3)
plate (i.e., flat-rolled stainless steel products of a thickness of
4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a
prepared edge, rectangular in shape, of a width of not more than 9.5
mm), and (5) razor blade steel. Razor blade steel is a flat rolled
product of stainless steel, not further worked than cold-rolled (cold-
reduced), in coils, of a width of not more than 23 mm and a thickness
of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent
chromium, and certified at the time of entry to be used in the
manufacture of razor blades. See Chapter 72 of the HTSUS, ``Additional
U.S. Note'' 1(d).
The Department has determined that certain specialty stainless
steel products are also excluded from the scope of this order. These
excluded products are described below:
Flapper valve steel is defined as stainless steel strip in coils
containing, by weight, between 0.37 and 0.43 percent carbon, between
1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent
manganese. This steel also contains, by weight, phosphorus of 0.025
percent or less, silicon of between 0.20 and 0.50 percent, and sulfur
of 0.020 percent or less. The product is manufactured by means of
vacuum arc remelting, with inclusion controls for sulphide of no more
than 0.04 percent and for oxide of no more than 0.05 percent. Flapper
valve steel has a tensile strength of between 210 and 300 ksi, yield
strength of between 170 and 270 ksi, plus or minus 8 ksi, and a
hardness (Hv) of between 460 and 590. Flapper valve steel is most
commonly used to produce specialty flapper valves in compressors.
Also excluded is a product referred to as suspension foil, a
specialty steel product used in the manufacture of suspension
assemblies for computer disk drives. Suspension foil is described as
302/304 grade or 202 grade stainless steel of a thickness between 14
and 127 microns, with a thickness tolerance of plus-or-minus 2.01
microns, and surface glossiness of 200 to 700 percent Gs. Suspension
foil must be supplied in coil widths of not more than 407 mm, and with
a mass of 225 kg or less. Roll marks may only be visible on one side,
with no scratches of measurable depth. The material must exhibit
residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm
over 685 mm length.
Certain stainless steel foil for automotive catalytic converters is
also excluded from the scope of this order. This stainless steel strip
in coils is a specialty foil with a thickness of between 20 and 110
microns used to produce a metallic substrate with a honeycomb structure
for use in automotive catalytic converters. The steel contains, by
weight, carbon of no more than 0.030 percent, silicon of no more than
1.0 percent, manganese of no more than 1.0 percent, chromium of between
19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of
no more than 0.045 percent, sulfur of no more than 0.03 percent,
lanthanum of between 0.002 and 0.05 percent, and total rare earth
elements of more than 0.06 percent, with the balance iron.
Permanent magnet iron-chromium-cobalt alloy stainless strip is also
excluded from the scope of this order. This ductile stainless steel
strip contains, by weight, 26 to 30 percent chromium, and 7 to 10
percent cobalt, with the remainder of iron, in widths 228.6 mm or less,
and a thickness between 0.127 and 1.270 mm. It exhibits magnetic
remanence between 9,000 and 12,000 gauss, and a coercivity of between
50 and 300 oersteds. This product is most commonly used in electronic
sensors and is currently available under proprietary trade names such
as ``Arnokrome III.''\4\
---------------------------------------------------------------------------
\4\ ``Arnokrome III'' is a trademark of the Arnold Engineering
Company.
---------------------------------------------------------------------------
Certain electrical resistance alloy steel is also excluded from the
scope of this order. This product is defined as a non-magnetic
stainless steel manufactured to American Society of Testing and
Materials (ASTM) specification B344 and containing, by weight, 36
percent nickel, 18 percent chromium, and 46 percent iron, and is most
notable for its resistance to high temperature corrosion. It has a
melting point of 1390 degrees Celsius and displays a creep rupture
limit of 4 kilograms per square millimeter at 1000 degrees Celsius.
This steel is most commonly used in the production of heating ribbons
for circuit breakers and industrial furnaces, and in rheostats for
railway locomotives. The product is currently available under
proprietary trade names such as ``Gilphy 36.''\5\
---------------------------------------------------------------------------
\5\ ``Gilphy 36'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------
Certain martensitic precipitation-hardenable stainless steel is
also excluded from the scope of this order. This high-strength, ductile
stainless steel product is designated under the Unified Numbering
System (UNS) as S45500-grade steel, and contains, by weight, 11 to 13
percent chromium, and 7 to 10 percent nickel. Carbon, manganese,
silicon and molybdenum each comprise, by weight, 0.05 percent or less,
with phosphorus and sulfur each comprising, by weight, 0.03 percent or
less. This steel has copper, niobium, and titanium added to achieve
aging, and will exhibit yield strengths as high as 1700 Mpa and
ultimate tensile strengths as high as 1750 Mpa after aging, with
elongation percentages of 3 percent or less in 50 mm. It is generally
provided in thicknesses between 0.635 and 0.787 mm, and in widths of
25.4 mm. This product is most commonly used in the manufacture of
television tubes and is currently available under proprietary trade
names such as ``Durphynox 17.''\6\
---------------------------------------------------------------------------
\6\ ``Durphynox 17'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------
Finally, three specialty stainless steels typically used in certain
industrial blades and surgical and medical instruments are also
excluded from the
[[Page 2115]]
scope of this order. These include stainless steel strip in coils used
in the production of textile cutting tools (e.g., carpet knives).\7\
This steel is similar to ASTM grade 440F, but containing, by weight,
0.5 to 0.7 percent of molybdenum. The steel also contains, by weight,
carbon of between 1.0 and 1.1 percent, sulfur of 0.020 percent or less,
and includes between 0.20 and 0.30 percent copper and between 0.20 and
0.50 percent cobalt. This steel is sold under proprietary names such as
``GIN4 HI-C.'' The second excluded stainless steel strip in coils is
similar to AISI 420-J2 and contains, by weight, carbon of between 0.62
and 0.70 percent, silicon of between 0.20 and 0.50 percent, manganese
of between 0.45 and 0.80 percent, phosphorus of no more than 0.025
percent and sulfur of no more than 0.020 percent. This steel has a
carbide density on average of 100 carbide particles per square micron.
An example of this product is ``GIN5'' steel. The third specialty steel
has a chemical composition similar to AISI 420 F, with carbon of
between 0.37 and 0.43 percent, molybdenum of between 1.15 and 1.35
percent, but lower manganese of between 0.20 and 0.80 percent,
phosphorus of no more than 0.025 percent, silicon of between 0.20 and
0.50 percent, and sulfur of no more than 0.020 percent. This product is
supplied with a hardness of more than Hv 500 guaranteed after customer
processing, and is supplied as, for example, ``GIN6.''
---------------------------------------------------------------------------
\7\ This list of uses is illustrative and provided for
descriptive purposes only.
---------------------------------------------------------------------------
Analysis of Comments Received
All issues raised in the case and rebuttal briefs by parties to
this review are addressed in the Decision Memorandum, which is hereby
adopted by this notice. A list of these issues contained in the
Decision Memorandum is attached to this notice as Appendix I. Parties
can find a complete discussion of all issues raised in this review and
the corresponding recommendations in this public memorandum, which is
on file in room B-099 of the Main Commerce Building. In addition, a
complete version of the Decision Memorandum can be accessed directly on
the World Wide Web at https://enforcement.trade.gov, under the heading
``Federal Register Notices.'' The paper copy and electronic version of
the Decision Memorandum are identical in content.
Final Results of Review
In accordance with section 705(c)(1)(B)(i) of the Act, we
calculated an ad valorem subsidy rate for INI/Sammi. For the period
January 1, 2001 through December 31, 2001, we determine the net subsidy
for INI/Sammi to be 0.55 percent ad valorem. This rate will also apply
to shipments by Inchon entered or withdrawn from warehouse for the
period January 1, 2001 through December 31, 2001.
We will instruct the U.S. Customs and Border Protection (CBP) to
assess countervailing duties as indicated above. The Department will
instruct the CBP to collect cash deposits of estimated countervailing
duties in the percentage detailed above of the f.o.b. invoice prices on
all shipments of the subject merchandise from the producers/exporters
under review, entered, or withdrawn from warehouse, for consumption on
or after the date of publication of the final results of this
administrative review.
Because the URAA replaced the general rule in favor of a country-
wide rate with a general rule in favor of individual rates for
investigated and reviewed companies, the procedures for establishing
countervailing duty rates, including those for non-reviewed companies,
are now essentially the same as those in antidumping cases, except as
provided for in section 777A(e)(2) of the Act. The requested review
will normally cover only those companies specifically named. See 19 CFR
351.213(b). Pursuant to 19 CFR 351.212(c), for all companies for which
a review was not requested, duties must be assessed at the cash deposit
rate, and cash deposits must continue to be collected, at the rate
previously ordered. As such, the countervailing duty cash deposit rate
applicable to a company can no longer change, except pursuant to a
request for a review of that company. See Federal-Mogul Corporation and
The Torrington Company v. United States, 822 F. Supp. 782 (CIT 1993)
and Floral Trade Council v. United States, 822 F. Supp. 766 (CIT 1993).
Therefore, the cash deposit rates for all companies except those
covered by this review will be unchanged by the results of this review.
We will instruct the CBP to continue to collect cash deposits for
non-reviewed companies at the most recent company-specific or country-
wide rate applicable to the company. As of April 1, 2002, Sammi changed
its name to BNG. See the Comment 2 of the March 19, 2003, Issues and
Decision Memorandum that accompanied the Final Results and Partial
Rescission of Countervailing Duty Administrative Review: Stainless
Steel Sheet and Strip From the Republic of Korea, 68 FR 13267 (March
19, 2003). Thus, for cash deposit purposes, we will instruct the CBP to
assign the rate for INI/Sammi's cash deposit rate to BNG. Accordingly,
the cash deposit rates that will be applied to non-reviewed companies
covered by this order will be the rate for that company established in
the most recently completed administrative proceeding conducted under
the URAA. If such a review has not been conducted, the rate established
in the most recently completed administrative proceeding pursuant to
the statutory provisions that were in effect prior to the URAA
amendments is applicable. See Stainless Steel Sheet and Strip in Coils
from the Republic of Korea: Amended Final Results of Countervailing
Duty Administrative Review, 67 FR 8229 (February 22, 2002). This rate
shall apply to all non-reviewed companies until a review of a company
assigned this rate is requested. In addition, for the period January 1,
2001 through December 31, 2001, the assessment rates applicable to all
non-reviewed companies covered by this order are the cash deposit rates
in effect at the time of entry.
This notice also serves as a reminder to parties subject to
administrative protective order (APO) of their responsibility
concerning the disposition of proprietary information disclosed under
APO in accordance with 19 CFR 351.305(a)(3). Timely written
notification of return/destruction of APO materials or conversion to
judicial protective order is hereby requested. Failure to comply with
the regulations and the terms of an APO is a sanctionable violation.
This administrative review and notice are issued and published in
accordance with section 751(a)(1) of the Act.
Dated: January 7, 2004.
James J. Jochum,
Assistant Secretary for Import Administration.
Appendix I - Issues and Decision Memorandum
I. METHODOLOGY AND BACKGROUND INFORMATION
A. Same Person Test for Sammi
B. Sammi and Cross-ownership with INI
II. SUBSIDIES VALUATION INFORMATION
A. Allocation Period
B. Benchmarks for Loans and Discount Rates
III. ANALYSIS OF PROGRAMS
A. Programs Determined to Confer Subsidies
1. The GOK's Direction of Credit
2. Article 16 of the Tax Exemption and Reduction Control Act
(TERCL): Reserve for Export Loss
3. Article 17 of TERCL: Reserve for
[[Page 2116]]
Overseas Market Development
4. Technical Development Fund under Restriction of Special
Taxation (RSTA) Article 9, formerly TERCL Article 8
5. Asset Revaluation TERCL Article 56(2)
6. Investment Tax Credits
7. Electricity Discounts under the Requested Loan Adjustment
Program (RLA)
8. Purchase of Sammi Specialty Steel Division by POSCO
B. Programs Determined to Be Not Used
1. Investment Tax Credits under RSTA Articles 11, 30, and 94 and
TERCL Articles 24, 27, 71
2. Loans from the National Agricultural Cooperation Federation
3. Tax Incentives for Highly-Advanced Technology Businesses under
the Foreign Investment and Foreign Capital Inducement Act
4. Reserve for Investment under Article 43-5 of TERCL
5. Export Insurance Rates Provided by the Korean Export Insurance
Corporation
6. Special Depreciation of Assets on Foreign Exchange Earnings
7. Excessive Duty Drawback
8. Short-Term Export Financing
9. Export Industry Facility Loans
10. Research and Development
11. Local Tax Exemption on Land Outside of Metropolitan Area
C. Programs Determined To Be Not Countervailable>
1. POSCO's Provision of Steel Inputs for Less than Adequate
Remuneration
2. Electricity Discounts under the Voluntary Electric Power
Savings Adjustment Program
3. Kangwon's Debt-to-Equity Swap
4. Debt Forgiveness Provided to Sammi by KAMCO
IV. TOTAL AD VALOREM RATE
V. ANALYSIS OF COMMENTS
Comment 1: Benchmarks for INI's and Sammi's Long-term Loans
Comment 2: Sale of Sammi's Bar and Pipe Facility at Changwon
Comment 3: Kangwon's Debt-for-Equity Swap
Comment 4: Debt Forgiveness Provided to Sammi by KAMCO
Comment 5: POSCO's Provision of Steel Inputs for Less than Adequate
Remuneration
[FR Doc. 04-832 Filed 1-13-04; 8:45 am]