03-a31

68 FR 62055, October 31, 2003

DEPARTMENT OF COMMERCE

International Trade Administration

[C-122-839]

Certain Softwood Lumber Products From Canada: Preliminary Results
of New Shipper Countervailing Duty Review

AGENCY: Import Administration, International Trade Administration,
Department of Commerce.

ACTION: Notice of preliminary results of countervailing duty new
shipper review.

-----------------------------------------------------------------------

SUMMARY: The Department of Commerce (the Department) is conducting a
new shipper review of Scierie La Pointe & Roy Ltee. (La Pointe & Roy)
under the countervailing duty order on certain softwood lumber products
from Canada for the period January 1, 2002, through December 31, 2002.
If the final results remain the same as the preliminary results of this
new shipper review, we will instruct the U.S. Customs and Border
Protection (CBP) to assess countervailing duties as detailed in the
``Preliminary Results of New Shipper Review'' section of this notice.
Interested parties are invited to comment on the preliminary results of
this new shipper review. (See the ``Public Comment'' section of this
notice).

EFFECTIVE DATE: October 31, 2003.

FOR FURTHER INFORMATION CONTACT: Eric B. Greynolds or Meg Ward, AD/CVD
Enforcement, Office VI, Group II, Import Administration, U.S.
Department of Commerce, Room 4012, 14th Street and Constitution Avenue,
NW., Washington, DC 20230; telephone (202) 482-2786.

SUPPLEMENTARY INFORMATION:

Background

On May 22, 2002, the Department published in the Federal Register
the countervailing duty order on certain softwood lumber products from
Canada. See Notice of Amended Final Affirmative Countervailing Duty
Determination and Countervailing Duty Order: Certain Softwood Products
From Canada, 67 FR 36070 (May 22, 2002). On November 26, 2002, we
received a request for a new shipper review from La Pointe & Roy, the
respondent company in the proceeding. On December 31, 2002, we
initiated a new shipper review covering the period January 1, 2002,
through December 31, 2002. See Certain Softwood Products From Canada:
Notice of Initiation of Antidumping Duty New Shipper Review for the
Period May 22, 2002, Through October 31, 2002; Notice of Initiation of
Countervailing Duty New Shipper Review for the Period January 1, 2002,
Through December 31, 2002; and Rescission of Countervailing Duty
Expedited Review, 68 FR 1030 (January 8, 2003).
On February 24, 2003, we issued a questionnaire to La Pointe & Roy.
On May 28, 2003, we extended the period for the completion of the
preliminary results pursuant to section 751(a)(2)(B)(iv) of the Tariff
Act of 1930, as amended (the Act). See Certain Softwood Lumber Products
From Canada: Notice of Extension of Time Limit for the Preliminary
Results of Countervailing Duty New Shipper Review, 68 FR 33921 (June 6,
2003). On April 4, 2003, La Pointe & Roy submitted its questionnaire
response. On September 5, 2003, the Department issued a questionnaire
to the Government of Canada (GOC) and the Government of Quebec (GOQ).
On September 22, 2003, the GOC and GOQ submitted a combined
questionnaire response.
In accordance with 19 CFR 351.214(a), this new shipper review
covers only those producers or exporters for which a review was
specifically requested. Accordingly, this new shipper review covers
subject merchandise produced and exported by La Pointe & Roy.

Scope of Review

The products covered by this order are softwood lumber, flooring
and siding (softwood lumber products). Softwood lumber products include
all products classified under headings 4407.1000, 4409.1010, 4409.1090,
and 4409.1020, respectively, of the Harmonized Tariff Schedule of the
United States (HTSUS), and any softwood lumber, flooring and siding
described below. These softwood lumber products include:
(1) Coniferous wood, sawn or chipped lengthwise, sliced or peeled,
whether or not planed, sanded or finger-jointed, of a thickness
exceeding six millimeters;
(2) Coniferous wood siding (including strips and friezes for
parquet flooring, not assembled) continuously shaped (tongued, grooved,
rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like)
along any of its edges or faces, whether or not planed, sanded or
finger-jointed;
(3) Other coniferous wood (including strips and friezes for parquet
flooring, not assembled) continuously shaped (tongued, grooved,
rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like)
along any of its edges or faces (other than wood moldings and wood
dowel rods) whether or not planed, sanded or finger-jointed; and
(4) Coniferous wood flooring (including strips and friezes for
parquet flooring, not assembled) continuously shaped (tongued, grooved,
rabbeted, chamfered, v-jointed, beaded, molded, rounded or the like)
along any of its edges or faces, whether or not planed, sanded or
finger-jointed.
Although the HTSUS subheadings are provided for convenience and
customs purposes, the written description of the merchandise subject to
this order is dispositive.
As specifically stated in the Issues and Decision Memorandum
accompanying the Notice of Final Determination of Sales at Less Than
Fair Value: Certain Softwood Lumber

[[Page 62056]]

Products from Canada (67 FR 15539; April 2, 2002) (see comment 53, item
D, page 116, and comment 57, item B-7, page 126), available at http://www.enforcement.trade.gov
, drilled and notched lumber and angle cut lumber are
covered by the scope of this order.
The following softwood lumber products are excluded from the scope
of this order provided they meet the specified requirements detailed
below:
(1) Stringers (pallet components used for runners): if they have at
least two notches on the side, positioned at equal distance from the
center, to properly accommodate forklift blades, properly classified
under HTSUS 4421.90.98.40.
(2) Box-spring frame kits: if they contain the following wooden
pieces--two side rails, two end (or top) rails and varying numbers of
slats. The side rails and the end rails should be radius-cut at both
ends. The kits should be individually packaged, they should contain the
exact number of wooden components needed to make a particular box
spring frame, with no further processing required. None of the
components exceeds 1'' in actual thickness or 83'' in length.
(3) Radius-cut box-spring-frame components, not exceeding 1'' in
actual thickness or 83'' in length, ready for assembly without further
processing. The radius cuts must be present on both ends of the boards
and must be substantial cuts so as to completely round one corner.
(4) Fence pickets requiring no further processing and properly
classified under HTSUS heading 4421.90.70, 1'' or less in actual
thickness, up to 8'' wide, 6' or less in length, and have finials or
decorative cuttings that clearly identify them as fence pickets. In the
case of dog-eared fence pickets, the corners of the boards should be
cut off so as to remove pieces of wood in the shape of isosceles right
angle triangles with sides measuring \3/4\ inch or more.
(5) U.S. origin lumber shipped to Canada for minor processing and
imported into the United States, is excluded from the scope of this
order if the following conditions are met: (1) The processing occurring
in Canada is limited to kiln-drying, planing to create smooth-to-size
board, and sanding, and (2) if the importer establishes to CBP
satisfaction that the lumber is of U.S. origin.
(6) Softwood lumber products contained in single family home
packages or kits,\1\ regardless of tariff classification, are excluded
from the scope of this order if the importer certifies to items 6 A, B,
C, D, and requirement 6 E is met:

\1\ To ensure administrability, we clarified the language of
exclusion number 6 to require an importer certification and to
permit single or multiple entries on multiple days as well as
instructing importers to retain and make available for inspection
specific documentation in support of each entry.
---------------------------------------------------------------------------

A. The imported home package or kit constitutes a full package of
the number of wooden pieces specified in the plan, design or blueprint
necessary to produce a home of at least 700 square feet produced to a
specified plan, design or blueprint;
B. The package or kit must contain all necessary internal and
external doors and windows, nails, screws, glue, sub floor, sheathing,
beams, posts, connectors, and if included in the purchase contract,
decking, trim, drywall and roof shingles specified in the plan, design
or blueprint.
C. Prior to importation, the package or kit must be sold to a
retailer of complete home packages or kits pursuant to a valid purchase
contract referencing the particular home design plan or blueprint, and
signed by a customer not affiliated with the importer;
D. Softwood lumber products entered as part of a single family home
package or kit, whether in a single entry or multiple entries on
multiple days, will be used solely for the construction of the single
family home specified by the home design matching the entry.
E. For each entry, the following documentation must be retained by
the importer and made available to the CBP upon request:

i. A copy of the appropriate home design, plan, or blueprint
matching the entry;
ii. A purchase contract from a retailer of home kits or packages
signed by a customer not affiliated with the importer;
iii. A listing of inventory of all parts of the package or kit
being entered that conforms to the home design package being entered;
iv. In the case of multiple shipments on the same contract, all
items listed in E(iii) which are included in the present shipment shall
be identified as well.
Lumber products that the CBP may classify as stringers, radius cut
box-spring-frame components, and fence pickets, not conforming to the
above requirements, as well as truss components, pallet components, and
door and window frame parts, are covered under the scope of this order
and may be classified under HTSUS subheadings 4418.90.45.90,
4421.90.70.40, and 4421.90.97.40.
Finally, as clarified throughout the course of the investigation,
the following products, previously identified as Group A, remain
outside the scope of this order. They are:
1. Trusses and truss kits, properly classified under HTSUS 4418.90;
2. I-joist beams;
3. Assembled box spring frames;
4. Pallets and pallet kits, properly classified under HTSUS
4415.20;
5. Garage doors;
6. Edge-glued wood, properly classified under HTSUS item
4421.90.98.40;
7. Properly classified complete door frames;
8. Properly classified complete window frames;
9. Properly classified furniture.
In addition, this scope language has been further clarified to now
specify that all softwood lumber products entered from Canada claiming
non-subject status based on U.S. country of origin will be treated as
non-subject U.S.-origin merchandise under the countervailing duty
order, provided that these softwood lumber products meet the following
condition: upon entry, the importer, exporter, Canadian processor and/
or original U.S. producer establish to CBP's satisfaction that the
softwood lumber entered and documented as U.S.-origin softwood lumber
was first produced in the United States as a lumber product satisfying
the physical parameters of the softwood lumber scope.\2\ The
presumption of non-subject status can, however, be rebutted by evidence
demonstrating that the merchandise was substantially transformed in
Canada.
---------------------------------------------------------------------------

\2\ See the scope clarification message ( 3034202),
dated February 3, 2003, to the CBP, regarding treatment of U.S.
origin lumber on file in the Central Records Unit, Room B-099 of the
main Commerce Building.
---------------------------------------------------------------------------

Analysis of Programs

I. Program Preliminarily Determined To Be Countervailable

A. Private Forest Development Program (PFDP)
In the underlying investigation, the Department found the PFDP to
be countervailable. See ``Program Administered by the Province of
Quebec,'' in the March 21, 2002, Issues and Decision Memorandum that
accompanied the Notice of Final Affirmative Countervailing Duty
Determination and Final Negative Critical Circumstances Determination:
Certain Softwood Lumber Products From Canada, 67 FR 15545 (April 2,
2002) (Lumber Final). Specifically, in the underlying investigation,
the Department determined that the PFDP provides silviculture support
to private

[[Page 62057]]

woodlot owners through payments, either made directly to forest
engineers or via reimbursement to the woodlot owner, for silviculture
treatments executed on private land. Thus, we found that payments under
the PFDP constitute a financial contribution under section 771(5)(D)(i)
of the Act and that the benefit conferred under the PFDP is equal to
the grant of funds provided during the review period. We further found
in the underlying investigation that because the PFDP is limited to
private woodlot owners, the assistance is specific under section
771(5A)(D) of the Act.
In its April 4, 2003, questionnaire response, La Pointe & Roy
reported that it received assistance from an agency known as the Agence
de Mise en Valeur de la Foret Privee de L'Estrie (AMFE) during calendar
year 2002, the period of review (POR). Specifically, AMFE arranged for
a company called the A.F.A. Des Appalaches Inc. (AFA) to perform
silviculture work on a private woodlot held by La Pointe & Roy. La
Pointe & Roy paid AFA for a portion of the work while AMFE directly
compensated AFA for the remaining amount. La Pointe & Roy received
similar assistance from the Agence de Mise en Valuer des Foret Privees
de Chaudiere (AMFC) in 1999. In its questionnaire response, La Pointe &
Roy stated that it did not know whether AMFE paid for the work
performed by AFA with assistance from the GOQ-run PFDP. It stated the
same with respect to the assistance received from AMFC.
According to the GOQ, AMFE and AMFC are two of 17 private regional
agencies established in 1996 for the protection and development of
private forest land in Quebec. Specifically, these agencies promote
private forest development by providing information, education, and
reimbursement to private woodlot owners for silviculture work. Each
regional agency has a board of directors comprised of representatives
from the municipality concerned, forest producer groups, holders of
wood processing plant permits, and the GOQ's Ministry of Natural
Resources (MRN). The agencies are funded by the MRN, via the PFDP, as
well as by fees the MRN collects from holders of wood processing plant
permits. Silviculture reimbursements made by the regional agencies
cover a maximum of 80 percent of the cost of the silviculture work
performed by or on behalf of the private woodlot owners. Private
woodlot owners receiving the assistance are responsible for funding the
difference.
La Pointe & Roy received assistance from AMFE and AMFC. We
preliminarily determine that the PFDP assistance is countervailable.
While the GOQ states that AMFE and AMFC are private organizations with
no governmental ties, this does not appear to be the case. We note that
all of the funding for these organizations is either provided by the
MRN/GOQ or is provided by means of government-mandated private
contributions and, as such, AMFE and AMFC appear to be government
authorities. Consequently, we preliminarily find the existence of a
subsidy in the form of a government financial contribution within the
meaning of section 771(5)(B)(i) of the Act (direct transfer of funds).
To the extent that AMFE and AMFC are non-governmental, however, we
preliminarily find the existence of a subsidy in the form of a
government ``payment to a funding mechanism to provide a financial
contribution'' or government action that ``entrusts or directs'' a
financial contribution within the meaning of section 771(5)(B)(iii) of
the Act. Further, we preliminarily determine that the assistance
received by La Pointe & Roy conferred a benefit in the form of a grant.
Finally, we continue to find that this program is specific under
section 771(5A)(D) of the Act, because assistance under this program is
limited to private woodlot owners.
In accordance with 19 CFR 351.524(b)(2), we have allocated all of
the grants provided under the PFDP to the year of receipt because the
total amounts approved under the program are less than 0.5 percent of
the company's total sales of softwood lumber products in the year of
receipt, net of resales. Using this methodology, the net subsidy rate
attributable to La Pointe & Roy under the PFDP is 0.08 percent ad
valorem.

II. Programs Preliminarily Determined To Be Not Used

A. Provincial Stumpage Program
In the underlying investigation, the Department determined that the
stumpage fees paid to harvest and cut Crown timber by softwood lumber
producers, which are set by the provincial governments, conferred a
countervailable benefit on the production and exportation of the
subject merchandise. See ``Provincial Stumpage Programs Determined To
Confer Subsidies,'' in the March 21, 2002, Issues and Decision
Memorandum that accompanied the Lumber Final. In this new shipper
review, La Pointe & Roy stated that it acquired all of its logs, its
sole input, from private lands. Because La Pointe & Roy has stated that
it did not utilize any inputs from the Crown during the POR, we

preliminarily determine that it did not use the program.

B. Export Assistance Under the Societe de Developpement Industrial du
Quebec (SDI)/Investissement Quebec(IQ)
La Pointe & Roy stated in its questionnaire response that it did
not apply for, use or benefit from SDI/IQ during the POR, therefore, we
preliminarily determine that it did not use the program. In the
underlying investigation, the Department determined that the export
assistance under SDI/IQ established, in part, to facilitate export
activities, did not confer a countervailable benefit on the exportation
of subject merchandise, given that the interest rates paid under this
program were equal to or higher than the interest rates charged on
comparable commercial loans at the time of the investigation. See
``Programs Determined Not to Confer a Benefit,'' in the March 21, 2002,
Issues and Decision Memorandum that accompanied the Lumber Final. As no
benefit was conferred during the POI, a final determination of this
program's countervailability was not made. We are not further examining
this program in the instant review because La Pointe & Roy did not use
it.

C. Assistance Under Articles 7 and 28 of the SDI
La Pointe & Roy stated in its questionnaire response that it did
not apply for, use or benefit from loans, loan guarantees or grants
issued under Articles 7 and 28 of the SDI during the POR, therefore, we
preliminarily determine that it did not use the program. In the
underlying investigation, the Department determined that no benefit was
provided by loans issued under Article 7 and 28 of the SDI because the
interest rates charged under this program were equal to or higher than
the interest rates charged on comparable commercial loans at the time
of the investigation. See ``Programs Determined Not to Confer a
Benefit,'' in the March 21, 2002, Issues and Decision Memorandum that
accompanied the Lumber Final. As no benefit was conferred during the
POI, a final determination of this program's countervailability was not
made. We are not further examining this program in the instant review
because La Pointe & Roy did not use it.

[[Page 62058]]

D. Assistance from the Societe de Recuperation d'Exploitation et de
Developpement Forestiers du Quebec (Rexfor)
La Pointe & Roy stated in its questionnaire response that it did
not apply for, use or benefit from loans or loan guarantees from Rexfor
during the POR, therefore, we preliminarily determine that it did not
use the program. In the underlying investigation, the Department
determined that no benefit was provided by loans issued under Rexfor
because the interest rates charged under this program were equal to or
higher than the interest rates charged on comparable commercial loans
at the time of the investigation. See ``Programs Determined Not to
Confer a Benefit,'' in the March 21, 2002, Issues and Decision
Memorandum that accompanied the Lumber Final. As no benefit was
conferred during the POI, a final determination of this program's
countervailability was not made. We are not further examining this
program in the instant review because La Pointe & Roy did not use it.

Preliminary Results of New Shipper Review

In accordance with section 751(a)(2)(B)(i) of the Act, we have
determined an individual rate for the manufacturer of the subject
merchandise participating in this new shipper review. We preliminarily
determine the total estimated net countervailable subsidy rate to be:

------------------------------------------------------------------------
Producer/Exporter Net subsidy rate
------------------------------------------------------------------------
Scierie La Pointe & Roy Ltee.............. 0.08 percent ad valorem
------------------------------------------------------------------------

As provided for in the Act and 19 CFR 351.106(c)(1) of the
Department's regulations, any rate less than 0.5 percent ad valorem in
a new shipper review is de minimis. Accordingly, if the final results
of this new shipper review remain the same as the preliminary results,
no countervailing duties will be assessed. The Department will instruct
CBP to liquidate without regard to countervailing duties, shipments of
the subject merchandise (e.g., certain softwood lumber from Canada)
produced and exported by La Pointe & Roy entered, or withdrawn from
warehouse, for consumption on or after May 22, 2002 and on or before
December 31, 2002. Also, the cash deposit rates will be set at zero for
this company. The Department will issue appropriate appraisement
instructions directly to the CBP within 15 days of publication of the
final results of this review.

Public Comment

Pursuant to 19 CFR 351.224(b), the Department will disclose to
parties to the proceeding any calculations performed in connection with
these preliminary results within five days after the date of
publication of this notice. Pursuant to 19 CFR 351.309, interested
parties may submit written comments in response to these preliminary
results. Case briefs must be submitted within 30 days after the date of
publication of this notice, and rebuttal briefs, limited to arguments
raised in case briefs, must be submitted no later than five days after
the time limit for filing case briefs. Parties who submit argument in
this proceeding are requested to submit with the argument: (1) a
statement of the issue, and (2) a brief summary of the argument. Case
and rebuttal briefs must be served on interested parties in accordance
with 19 CFR 351.303(f).
Also, pursuant to 19 CFR 351.310, within 30 days of the date of
publication of this notice, interested parties may request a public
hearing on arguments to be raised in the case and rebuttal briefs.
Unless the Secretary specifies otherwise, the hearing, if requested,
will be held two days after the date of submission of rebuttal briefs,
that is, thirty-seven days after the date of publication of these
preliminary results.
Representatives of parties to the proceeding may request disclosure
of proprietary information under administrative protective order no
later than 10 days after the representative's client or employer
becomes a party to the proceeding, but in no event later than the date
the case briefs, under 19 CFR 351.309(c)(ii), are due. The Department
will publish the final results of this administrative review, including
the results of its analysis of issues raised in any case or rebuttal
brief or at a hearing.
This administrative review and notice are issued and published in
accordance with section 751(a)(1) and 777(i)(1) of the Act (19 U.S.C.
1675(a)(1) and 19 U.S.C. 1677f(1)).

Dated: October 24, 2003.
James J. Jochum,
Assistant Secretary for Import Administration.
[FR Doc. 03-27495 Filed 10-30-03; 8:45 am]