NOTICES
DEPARTMENT OF COMMERCE
International Trade Administration
[C-351-831]
Final Affirmative Countervailing Duty Determination: Certain Cold Rolled Flat- Rolled Carbon-Quality Steel Products From Brazil
Friday, February 4, 2000
*5536
AGENCY: Import Administration, International Trade Administration, Department of Commerce.
EFFECTIVE DATE: February 4, 2000.
FOR FURTHER INFORMATION CONTACT: Dana Mermelstein or Javier Barrientos, Office of CVD/AD Enforcement VII, Import Administration, U.S. Department of Commerce, Room 7866, 14th Street and Constitution Avenue, N.W., Washington, D.C. 20230; telephone (202) 482-3208 and (202) 482-2243, respectively.
FINAL DETERMINATION: The Department of Commerce (the Department) determines that countervailable subsidies are being provided to producers and/or exporters of certain cold-rolled flat-rolled carbon-quality steel products from Brazil. For information on the estimated countervailing duty rates, please see the "Suspension of Liquidation" section of this notice.
SUPPLEMENTARY INFORMATION:
Petitioners
The petition in this investigation was filed by Bethlehem Steel Corporation,
*5537
Gulf States Steel Inc., Ispat Inland, Inc., LTV Steel Company, Inc., National Steel Corporation, Steel Dynamics Inc., U.S. Steel Group (a unit of USX Corporation), Weirton Steel Corporation, the Independent Steelworkers of America and the United Steelworkers of America (collectively, "the petitioners").
Case History
Since the publication of our preliminary determination in this investigation on October 1, 1999 (Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Countervailing Duty Determination With Final Antidumping Duty Determination: Certain Cold Rolled Flat-Rolled Carbon-Quality Steel Products from Brazil, 64 FR 53332) (Preliminary Determination), the following events have occurred: We conducted verification of the countervailing duty questionnaire responses from October 21 through October 26, 1999. The final determination of this countervailing duty investigation was aligned with the final antidumping duty determination (see 64 FR at 53334). On December 2, 1999, and December 7, 1999, the Department released its verification reports to all interested parties. Respondents submitted a case brief on December 15, 1999; petitioners submitted a rebuttal brief on December 21, 1999.
Scope of Investigations
For purposes of this investigation, the products covered are certain cold- rolled (cold-reduced) flat-rolled carbon-quality steel products, neither clad, plated, nor coated with metal, but whether or not annealed, painted, varnished, or coated with plastics or other non-metallic substances, both in coils, 0.5 inch wide or wider, (whether or not in successively superimposed layers and/or otherwise coiled, such as spirally oscillated coils), and also in straight lengths, which, if less than 4.75 mm in thickness having a width that is 0.5 inch or greater and that measures at least 10 times the thickness; or, if of a thickness of 4.75 mm or more, having a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process (i.e., products which have been "worked after rolling")--for example, products which have been beveled or rounded at the edges.
Specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free ("IF")) steels, high strength low alloy ("HSLA") steels, and motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination steels contain micro-alloying levels of elements such as silicon and aluminum.
Steel products included in the scope of this investigation, regardless of definitions in the Harmonized Tariff Schedules of the
United States ("HTSUS"), are products in which: (1) Iron predominates, by weight, over each of the other contained
elements; (2) the carbon content is 2 percent or less, by weight, and; (3) none of the elements listed below exceeds the
quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium (also called columbium), or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the written physical description, and in which the
chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this
investigation unless specifically excluded. The following products, by way of example, are outside and/or specifically
excluded from the scope of this investigation:
- SAE grades (formerly also called AISI grades) above 2300;
- Ball bearing steels, as defined in the HTSUS;
- Tool steels, as defined in the HTSUS;
- Silico-manganese steel, as defined in the HTSUS;
- Silicon-electrical steels, as defined in the HTSUS, that are grain-oriented;
- Silicon-electrical steels, as defined in the HTSUS, that are not grain- oriented and that have a silicon level exceeding 2.25
percent;
- All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507);
- Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which
have assumed the character of articles or products classified outside chapter 72 of the HTSUS.
- Silicon-electrical steels, as defined in the HTSUS, that are not grain- oriented and that have a silicon level less than 2.25
percent, and (a) fully- processed, with a core loss of less than 0.14 watts/pound per mil (.001 inch), or (b) semi-processed,
with core loss of less than 0.085 watts/pound per mil (.001 inch);
- Certain shadow mask steel, which is aluminum killed cold-rolled steel coil that is open coil annealed, has an ultra-flat,
isotropic surface, and which meets the following characteristics:
Thickness: 0.001 to 0.010 inch
Width: 15 to 32 inches
Chemical Composition
----------------------
Element ....... C
Weight % ... @ 0.002%
----------------------
- Certain flapper valve steel, which is hardened and tempered, surface polished, and which meets the following
characteristics:
Thickness: 1.0 mm
Width: 152.4 mm
Chemical Composition
------------------------------------------------------------------
Element ........ C ......... Si ......... Mn ........ P ..... S
Weight % ... 0.90-1.05 .. 0.15-0.35 .. 0.30-0.50 .. 0.03 . 0.006
------------------------------------------------------------------
Mechanical Properties
------------------------------------------------
Tensile Strength .. 162 Kgf/mm super2
Hardness .......... 475 Vickers hardness number
------------------------------------------------
Physical Properties
-----------------------------------------
Flatness .. less than 0.2% of nominal strip width
-----------------------------------------
*5538
Microstructure: Completely free from decarburization. Carbides are spheroidal and fine within 1% to 4% (area percentage)
and are undissolved in the uniform tempered martensite.
Non-metallic Inclusion
------------------------------------
Area percentage
------------------------------------
Sulfide Inclusion .. less than or =0.04%
Oxide Inclusion .... less than or =0.05%
------------------------------------
Compressive Stress: 10 to 40 Kgf/mm super2
Surface Roughness
- Certain ultra thin gauge steel strip, which meets the following characteristics:
Chemical Composition
Mechanical Properties
Physical Properties
- Certain silicon steel, which meets the following characteristics:
Chemical Composition
Mechanical Properties
Physical Properties
Magnetic Properties
*5539
- Certain aperture mask steel, which has an ultra-flat surface flatness and which meets the following characteristics:
Chemical Composition
- Certain annealed and temper-rolled cold-rolled continuously cast steel, which meets the following characteristics:
[Note: The following TABLE/FORM is too wide to be displayed on one screen.
You must print it for a meaningful review of its contents. The table has been
divided into multiple pieces with each piece containing information to help you
assemble a printout of the table. The information for each piece includes: (1)
a three line message preceding the tabular data showing by line # and
character # the position of the upper left-hand corner of the piece and the
position of the piece within the entire table; and (2) a numeric scale
following the tabular data displaying the character positions.]
*******************************************************************************
Chemical Composition
1...+...10....+...20....+...30....+...40....+...50....+...60....+...70...
--------------------------------------
Surface Finish
Chemical Composition
Physical and Mechanical Properties
- Certain annealed and temper-rolled cold-rolled continuously cast steel, in coils, with a certificate of analysis per Cable
System International ("CSI") Specification 96012, with the following characteristics:
Chemical Composition
Physical and Mechanical Properties
*5540
- Certain full hard tin mill black plate, continuously cast, which meets the following characteristics:
[Note: The following TABLE/FORM is too wide to be displayed on one screen.
You must print it for a meaningful review of its contents. The table has been
divided into multiple pieces with each piece containing information to help you
assemble a printout of the table. The information for each piece includes: (1)
a three line message preceding the tabular data showing by line # and
character # the position of the upper left-hand corner of the piece and the
position of the piece within the entire table; and (2) a numeric scale
following the tabular data displaying the character positions.]
*******************************************************************************
Chemical Composition
--------------------------------------
Surface Treatment as follows:
- Certain ultra-bright tin mill black plate meeting ASTM 7A specifications for surface finish and RA of seven micro-inches or
lower.
Physical and Mechanical Properties
- Certain cold-rolled black plate bare steel strip, in coils, meeting ASTM A-623, Table II, Type MR specifications, which
meet the following characteristics:
Chemical Composition
Physical and Mechanical Properties
*5541
- Certain "blued steel" coil (also know as "steamed blue steel" or "blue oxide") with a thickness of 0.30 mm to 0.42 mm and
width of 609 mm to 1219 mm, in coil form;
- Certain cold-rolled steel, which meets the following characteristics:
Chemical Composition
Physical and Mechanical Properties
- Certain band saw steel, which meets the following characteristics:
Chemical Composition
Other properties:
Carbide: Fully spheroidized having > 80% of carbides, which are less than or = 0.003 mm and uniformly dispersed
Variety 1:
Chemical Composition
Physical and Mechanical Properties
*5542
Variety 2
Chemical Composition
Physical and Mechanical Properties
Variety 3
Chemical Composition
Physical and Mechanical Properties
_ Certain corrosion-resistant cold-rolled steel, which meets the following characteristics:
Variety 1
Chemical Composition
Physical and Mechanical Properties
Variety 2
*5543
Chemical Composition
Physical and Mechanical Properties
Variety 3
Chemical Composition
Physical and Mechanical Properties
- Porcelain enameling sheet, drawing quality, in coils, 0.014 inch in thickness, +0.002, -0.000, meeting ASTM A-424-96
Type 1 specifications, and suitable for two coats.
The merchandise subject to this investigation is typically classified in the HTSUS at subheadings: 7209.15.0000,
7209.16.0030, 7209.16.0060, 7209.16.0090, 7209.17.0030, 7209.17.0060, 7209.17.0090, 7209.18.1530,
7209.18.1560, 7209.18.2550, 7209.18.6000, 7209.25.0000, 7209.26.0000, 7209.27.0000, 7209.28.0000,
7209.90.0000, 7210.70.3000, 7210.90.9000, 7211.23.1500, 7211.23.2000, 7211.23.3000, 7211.23.4500,
7211.23.6030, 7211.23.6060, 7211.23.6085, 7211.29.2030, 7211.29.2090, 7211.29.4500, 7211.29.6030,
7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7225.19.0000, 7225.50.6000,
7225.50.7000, 7225.50.8010, 7225.50.8085, 7225.99.0090, 7226.19.1000, 7226.19.9000, 7226.92.5000,
7226.92.7050, 7226.92.8050, and 7226.99.0000.
Although the HTSUS subheadings are provided for convenience and U.S. Customs Service ("U.S. Customs") purposes, the
written description of the merchandise under investigation is dispositive.
The Department received comments from a number of parties including importers, respondents, consumers, and the
petitioners, aimed at clarifying the scope of these investigations. See Memorandum to Joseph A. Spetrini ("Scope
Memorandum"), January 18, 2000, for a list of all persons submitting comments and a discussion of all scope comments
including those exclusion requests under consideration at the time of the preliminary determination in these
investigations.
The Applicable Statute and Regulations
Unless otherwise indicated, all citations to the statute are references to the provisions of the Tariff Act of 1930, as amended
by the Uruguay Round Agreements Act (URAA) effective January 1, 1995 (the Act). In addition, unless otherwise
indicated, all citations to the Department's regulations are to the current regulations as codified at 19 CFR Part 351 (1999)
and to the substantive countervailing duty regulations published in the Federal Register on November 25, 1998 (63
FR 65348)(CVD Regulations).
Injury Test
Because Brazil is a "Subsidies Agreement Country" within the meaning of section 701(b) of the Act, the International
Trade Commission (ITC) is required to determine whether imports of the subject merchandise from Brazil materially
injure, or threaten material injury to, a U.S. industry. On July 30, 1999, the ITC published its preliminary
determination that there is a reasonable indication that an industry in the United States is being materially injured, or
threatened with material injury, by reason of imports from Brazil of the subject merchandise (64 FR 41458). The
Commission transmitted its determination in this investigation to the Secretary of Commerce on July 19, 1999. The views of the Commission are
contained in USITC Publication 3214 (July 1999), entitled Certain Cold-Rolled Steel Products from Argentina, Brazil,
China, Indonesia, Japan, Russia, Slovakia, South Africa, Taiwan, Thailand, Turkey, and Venezuela: Investigations Nos.
701-TA-393-396 and 731-TA- 829-840 (Preliminary).
Period of Investigation
The period of investigation (the POI) for which we are measuring subsidies is calendar year 1998.
Company Histories
USIMINAS was founded in 1956 as a venture between the Brazilian Government, various stockholders and Nippon
Usiminas. In 1974, the majority interest in USIMINAS was transferred to SIDERBRAS, the government holding company
for steel interests. The company underwent several expansions of capacity throughout the 1980s. In 1990, SIDERBRAS
was put into liquidation and the Government of Brazil (GOB) decided to include its operating companies, including
*5544
USIMINAS, in its National Privatization Program (NPP). In 1991, USIMINAS was partially privatized; as a result of the initial auction, Companhia do Vale do Rio Doce (CVRD), a majority
government-owned iron ore producer, acquired 15 percent of USIMINAS's common shares. In 1994, the Government
disposed of additional holdings, amounting to 16.2 percent of the company's equity. USIMINAS is now owned by CVRD and
a consortium of private investors, including Nippon Usiminas, Caixa de Previdencia dos Funcionarios do Banco do Brasil
(Previ) and the USIMINAS Employee Investment Club. CVRD was partially privatized in 1997, when 31 percent of the
company's shares were sold.
COSIPA was established in 1953 as a government-owned steel production company. In 1974, COSIPA was transferred to
SIDERBRAS. Like USIMINAS, COSIPA was included in the NPP after SIDERBRAS was put into liquidation. In 1993, COSIPA
was partially privatized, with the GOB retaining a minority of the preferred shares. Control of the company was acquired by
a consortium of investors led by USIMINAS. In 1994, additional government-held shares were sold, but the GOB still
maintained approximately 25 percent of COSIPA's preferred shares. During the POI, USIMINAS owned 49.8 percent of the
voting capital stock of the company. Other principal owners include Bozano Simonsen Asset Management Ltd., the COSIPA
Employee Investment Club, and COSIPA's Pension Fund (FEMCO).
CSN was established in 1941 and commenced operations in 1946 as a government-owned steel company. In 1974, CSN was transferred to SIDERBRAS. In 1990, when SIDERBRAS was put into liquidation,
the GOB included CSN in its NPP. In 1991, 12 percent of the equity of the company was transferred to the CSN employee
pension fund. In 1993, CSN was partially privatized; CVRD, through its subsidiary Vale do Rio Doce Navegacao S.A.
(Docenave), acquired 9.4 percent of the common shares. The GOB's remaining share of the firm was sold in 1994. CSN is
now owned by Docenave/CVRD and a consortium of private investors, including Uniao Comercio e Partipacoes Ltda.,
Textilia S.A., Previ, the CSN Employee Investment Club, and the CSN employee pension fund. As discussed above, CVRD
was partially privatized in 1997; CSN was part of the consortium that acquired control of CVRD through this partial
privatization.
Attribution of Subsidies
There are three producers/exporters of the subject merchandise in this investigation: USIMINAS, COSIPA, and CSN. As
discussed above, USIMINAS owns 49.8 percent of COSIPA. The CVD Regulations, at section 351.525(b)(6)(ii), provide
guidance with respect to the attribution of subsidies between or among companies which have cross-ownership.
Specifically, with respect to two or more corporations producing the subject merchandise which have cross-ownership,
the regulations direct us to attribute the subsidies received by either or both
corporations to the products produced by both corporations. Further, section 351.525(b)(6)(vi) defines cross-ownership
as existing "between two or more corporations where one corporation can use or direct the individual assets of the other
corporation(s) in essentially the same ways it can use its own assets. Normally, this standard will be met where there is a
majority voting ownership interest between two corporations through common ownership of two (or more) corporations."
The preamble to the CVD Regulations identifies situations where cross-ownership may exist even though there is less than
a majority voting interest between two corporations: "In certain circumstances, a large minority interest (for example, 40
percent) or a 'golden share' may also result in cross-ownership" (63 FR at 65401).
In this investigation, we preliminarily determined that USIMINAS's 49.8 percent ownership interest in COSIPA is sufficient
to establish cross-ownership between the two companies because USIMINAS is capable of using or directing the individual
assets of COSIPA in essentially the same ways it can use its own assets. We based this determination on the following:
(1) USIMINAS has virtually a majority share in COSIPA; and (2) the remaining shareholdings are divided among numerous
shareholders (more than ten), with no one shareholder controlling even one-quarter of the shares which USIMINAS
controls. See Preliminary Determination, 64 FR 53332, 53334-35. We did not learn anything at verification which
would lead us to change our preliminary determination nor did we receive any comments on this issue. Thus, for purposes of this final determination, we have continued to
calculate one subsidy rate for USIMINAS/COSIPA, by adding together their countervailable subsidies during the POI and
dividing that amount by the sum of the two companies' sales during the POI.
We have also examined the ownership of CSN. We note that during the POI, two entities, CVRD and Previ (the pension fund
of the Bank of Brasil), had meaningful holdings in both USIMINAS and CSN. As these entities both have ownership interests
in and elect members to the Boards of Directors of both companies, we examined whether CSN and USIMINAS could,
notwithstanding the absence of direct cross-ownership between them, have cross-ownership such that their interests are
merged, and one company could have the ability to use or direct the assets of the other through their common investors.
CVRD holds 15.48 percent of USIMINAS and 10.3 percent of CSN (through Docenave); Previ holds 15 percent of the
common shares of USIMINAS and 13 percent of CSN. Both USIMINAS and CSN are controlled through shareholders'
agreements, which require that the participating shareholders (who together account for more than 50 percent of the
shares of the company) pre-vote issues before the Board of Directors and vote as a block. While CVRD and Previ both
participate in the CSN shareholders' agreement, and thus exercise considerable influence over the use of CSN's assets,
neither CVRD nor Previ participates in the USIMINAS shareholders' agreement and neither CVRD nor Previ has any appreciable influence (beyond their respective 15.48 and 15
percent USIMINAS shareholdings) over the use of USIMINAS's assets. Therefore, CVRD's and Previ's shareholdings in both
USIMINAS and CSN are not sufficient to establish cross-ownership between those two companies under our regulatory
standard. This absence of common majority or significant minority shareholders led us to preliminarily determine that
USIMINAS's and CSN's interests have not merged, i.e., one company is not able to use or direct the individual assets of the
other as though the assets were their own. Moreover, we found no other evidence such as golden shares or close supplier
relationships to lead us to conclude that there is indirect cross-ownership. See Preliminary Determination at
53335. We did not learn anything at verification which would lead us to change our preliminary determination nor
did we receive any comments on this issue. Thus, for the purposes of this final determination, we have calculated a
separate countervailing duty rate for CSN.
Changes in Ownership
In the General Issues Appendix (GIA), attached to the Final Affirmative
*5545
Countervailing Duty Determination; Certain Steel Products from Austria, 58 FR 37217, 37226 (July 9, 1993), we
applied a new methodology with respect to the treatment of subsidies received prior to the sale of the company (privatization).
Under this methodology, we estimate the portion of the company's purchase price which is attributable to prior subsidies.
We compute this estimate by first dividing the face value of the company's subsidies by the company's net worth for each of
the years corresponding to the company's allocation period, ending one year prior to the privatization. We then take the
simple average of these ratios, which serves as a reasonable surrogate for the percentage that subsidies constitute of the
overall value, i.e., net worth, of the company. Next, we multiply the purchase price of the company by this average ratio to
derive the portion of the purchase price that we estimate to reflect the repayment of prior subsidies. Then, we reduce the
benefit streams of the prior subsidies by the ratio of the repayment/reallocation amount to the net present value of all
remaining benefits at the time of the change in ownership. For this final determination, we have conformed our net
present value calculation with the methodology outlined in the GIA. See GIA 58 FR at 37263.
In the current investigation, we are analyzing the privatizations of USIMINAS, COSIPA and CSN, including the various
partial privatizations. In conducting these analyses, to the extent that government-owned or controlled companies
purchased shares, we have not applied our methodology to that percentage of the acquired shares equal to the percentage
of government ownership in the partially government-owned purchaser (notwithstanding respondents' arguments on this issue which are discussed below
in Comment 6). We have also adjusted certain figures included in the privatization calculations to account for inflationary
accounting practices. Further, we accounted for CVRD's 1997 partial privatization by making the same adjustments to
USIMINAS and CSN's calculations described in Final Affirmative Countervailing Duty Determination: Certain
Hot-Rolled Flat-Rolled Carbon-Quality Steel Products from Brazil (Brazil Hot-Rolled Final) 64 FR 38742,
38745, 38752 (Department's Position on Comment 3).
In Brazil Hot-Rolled Final, we also noted the use of privatization currencies, i.e., certain existing government bonds,
privatization certificates and frozen currencies, and examined them in the context of our privatization methodology. We
obtained information about the use and valuation of the privatization currencies that were used in the NPP, and we learned
about how privatization currencies were valued in the context of the privatization auctions. Specifically, we found that the
GOB accepted most of these currencies at their full redeemable value (face value discounted according to the time
remaining until maturity). Additionally, foreign debt and restructuring bonds (MYDFAs) were accepted at 75 percent of
their redeemable value. Many of the government bonds that were accepted as privatization currencies were routinely
trading at a discount on secondary markets. However, no data or estimation of the applicable discounts was provided for the record in that investigation. See Brazil Hot-Rolled Final at 38745. Further,
it was common knowledge that these bonds traded at a significant discount in these markets, and that investors actively
traded to obtain the cheapest bonds in order to maximize their positions in the privatization auctions. The value of the
bonds varied depending on the instrument's yield and length to maturity and traded within a range of 40 percent to 90
percent of the redeemable value, i.e., with a discount ranging from 10 percent to 60 percent. Because various issues of
bonds were accepted as privatization currencies, with different yields and terms, precise valuation data was not available.
However, public information from the record of the hot-rolled investigation, subsequently placed on the record of
this investigation, indicates that during the period 1991 through 1994 most bonds traded with discounts ranging from 40
to 60 percent on average. Privatization Certificates (CPs), which banks were forced to purchase and could only be used in
the privatization auctions, traded at a discount of approximately 60 percent on average; MYDFAs traded at 30 percent of
their face value, i.e., at a discount of 70 percent. See Brazil Hot-Rolled Final, 64 FR at 38745.
In the hot-rolled investigation, we concluded that some adjustment to the purchase price of the companies was
warranted because of the use of privatization currencies in the auctions. See Brazil Hot-Rolled Final, at 38745, 38752 (the Department's Position on Comment 3). Although this issue is discussed further in Comments 6 and 7
below, no further information has been provided in the record of this investigation which would enable us to refine or
otherwise cause us to change the approach we developed in the hot-rolled investigation. Thus, we have followed the
same approach and have applied a 30 percent discount to the MYDFAs. In addition, as we did in the hot-rolled
investigation, we have applied a 60 percent discount to the CPs. See Id. For the remaining privatization currencies, in the
Brazil Hot-Rolled Final, we applied a 50 percent discount as facts available, which reflected an average of the range of
discounts estimated. Because no information has been provided in this investigation which accurately indicates the
relevant secondary market discounts for these instruments, and in accordance with section 776(a) of the Act, we are again
applying, as facts available, the 50 percent discount to the remaining privatization currencies.
Subsidies Valuation Information
Allocation Period
Section 351.524(d)(2) of the CVD Regulations states that we will presume the allocation period for non-recurring subsidies
to be the average useful life (AUL) of renewable physical assets for the industry concerned, as listed in the Internal Revenue Service's (IRS) 1977 Class
Life Asset Depreciation Range System and updated by the Department of Treasury. The presumption will apply unless a
party claims and establishes that these tables do not reasonably reflect the AUL of the renewable physical assets for the
company or industry under investigation, and the party can establish that the difference between the company-specific or
country-wide AUL for the industry under investigation is significant.
In this investigation, no party to the proceeding has claimed that the AUL listed in the IRS tables does not reasonably
reflect the AUL of the renewable physical assets for the firm or industry under investigation. Therefore, in accordance with
section 351.524(d)(2) of the CVD Regulations, and for the purposes of this final determination, we are using the
15-year AUL as reported for the steel industry in the IRS tables to allocate the non-recurring subsidies under investigation.
Equityworthiness
In accordance with section 351.507 (a)(1) of the Department's CVD Regulations, a government-provided equity infusion
confers a benefit to the extent that the investment decision is inconsistent with the usual investment practice of
private investors, including
*5546
the practice regarding the provision of risk capital, in the country in which the equity infusion is made. See also section
771(5)(E)(i) of the Act. In Preliminary Determination, we determined that there was no reason to change our
findings from prior investigations, i.e., that the respondent companies were unequityworthy (in the relevant years) as
follows: (1) COSIPA was unequityworthy from 1977 through 1989, and 1992 through 1993; (2) USIMINAS was
unequityworthy from 1980 through 1988; and (3) CSN was unequityworthy from 1977 through 1992. Final Affirmative
Countervailing Duty Determinations: Certain Steel Products from Brazil, 58 FR 37295, 37297 (July 9, 1993)
(1993 Certain Steel Final; Brazil Hot-Rolled Final, 64 FR at 38746. We note that because the Department determined
that it is appropriate to use a 15-year allocation period for non-recurring subsidies, equity infusions provided prior to
1984 no longer provide benefits in the POI. None of the parties has submitted information or argument, nor is there
evidence of changed circumstances which would cause us to reconsider these determinations.
Equity Methodology
Section 351.507(a)(3) of the Department's CVD Regulations provides that a determination that a firm is
unequityworthy constitutes a determination that the equity infusion was inconsistent with usual investment practices of private investors. The applicable methodology is
described in section 351.507(a)(6) of the regulations, which provides that the Department will treat the equity infusion as a
grant. Use of the grant methodology for equity infusions into an unequityworthy company is based on the premise that an
unequityworthiness finding by the Department is tantamount to saying that the company could not have attracted
investment capital from a reasonable investor in the infusion year based on the available information.
Creditworthiness
To determine whether a company is uncreditworthy, the Department must examine whether the firm could have obtained
long-term loans from conventional commercial sources based on information available at the time of the
government-provided loan. See section 351.505(a)(4) of the CVD Regulations. In this context, the term "commercial"
refers to loans taken out by the firm from a commercial lending institution or debt instruments issued by the firm in a
commercial market. See section 351.505(a)(2)(ii) of the CVD Regulations.
The Department has previously determined that respondents were uncreditworthy in the following years: USIMINAS,
1984-1988; COSIPA, 1984-1989 and 1991-1993; and CSN 1984-1992. See Certain Steel from Brazil, 58 FR at 37297;
Brazil Hot-Rolled Final, 64 FR at 38746-38747. The parties have not presented any new information or arguments that would
lead us to reconsider these findings.
Discount Rates
From 1984 through 1994, Brazil experienced persistent high inflation. There were no long-term fixed-rate commercial
loans made in domestic currencies during those years that could be used as discount rates. As in the Certain Steel Final (58
FR at 37298) and the Brazil Hot-Rolled Final (64 FR 38745- 38746), we have determined that the most reasonable
way to account for the high inflation in the Brazilian economy through 1994, and the lack of an appropriate Brazilian
discount rate, is to convert the non-recurring subsidies into U.S. dollars. If available, we applied the exchange rate
applicable on the day the subsidies were received, or, if unavailable, the average exchange rate in the month the subsidies
were received. Then we applied, as the discount rate, a long-term dollar lending rate. Therefore, for our discount rate, we
used data for U.S. dollar lending in Brazil for long-term non-guaranteed loans from private lenders, as published in the
World Bank Debt Tables: External Finance for Developing Countries. This conforms with our practice in Certain Steel Final
(58 FR at 37298); Brazil Hot-Rolled Final (64 FR at 38746); and, Final Affirmative Countervailing Duty
Determination: Steel Wire Rod from Venezuela, 62 FR 55014, 55019, 55023 (October 21, 1997).
As discussed above, we have determined that USIMINAS, COSIPA, and CSN were uncreditworthy in the years in which they
received equity infusions. Section 351.505 (a)(3)(iii) of the CVD Regulations directs us regarding the calculation of the
benchmark interest rate for purposes of calculating the benefits for uncreditworthy companies: To calculate the
appropriate rate for uncreditworthy companies, the Department must identify values for the probability of default by
uncreditworthy and creditworthy companies. For the probability of default by an uncreditworthy company, we normally
rely on the average cumulative default rates reported for the Caa to C-rated category of companies as published in Moody's
Investors Service, "Historical Default Rates of Corporate Bond Issuers, 1920-1997" (February 1998). [FN1]See 19 CFR
351.505(a)(3)(iii). For the probability of default by a creditworthy company, we used the cumulative default rates for
Investment Grade bonds as reported by Moody's. We established that this figure represents a weighted average of the
cumulative default rates for Aaa to Baa-rated companies. See September 24, 1999, Memorandum to the File,
"Conversations and correspondence regarding the weighted average default rates of corporate bond issuers as published
by Moody's," on file in the Central Records Unit, Room B-099 of the main Commerce building (CRU). The use of the
weighted average is appropriate because the data reported by Moody's for the Caa to C-rated companies are also weighted
averages. See Id. For non-recurring subsidies, we used the average cumulative default rates for both uncreditworthy and
creditworthy companies based on a 15- year term, since all of the non-recurring subsidies examined were allocated over a
15-year period.
FN1 We note that since publication of the CVD Regulations, Moody's Investors Service no longer reports default rates for
Caa to C-rated category of companies. Therefore for the calculation of uncreditworthy interest rates, we will continue to
rely on the default rates as reported in Moody Investor Service's publication dated February 1998 (at Exhibit 28).
I. Programs Determined To Be Countervailable
The GOB, through SIDERBRAS, provided equity infusions to USIMINAS (1984 through 1988), COSIPA (198 through 1989
and 1991) and CSN (1984 through 1991) that have previously been investigated by the Department. See Certain Steel from
Brazil, 58 FR at 37298; Brazil Hot-Rolled Final, 64 FR at 38747-38748.
For the reasons discussed above, we preliminarily determined that under section 771(5)(E)(i) of the Act, the equity
infusions into USIMINAS, COSIPA and CSN were not consistent with the usual investment practices of private investors (see "Equityworthiness" section above).
Thus, these infusions constitute financial contributions within the meaning of section 771(5)(D) of the Act and confer a
benefit in the amount of each infusion. These equity infusions are specific within the meaning of section 771(5A)(D) of the
Act because they were limited to each of the companies. Accordingly, we preliminarily determined that the pre-1992
equity infusions are countervailable subsidies within the
*5547
meaning of section 771(5) of the Act. See Preliminary Determination, 64 FR at 53337. No parties have provided
any new information or argument which would lead us to reconsider this determination.
As explained in the "Equity Methodology" section above, we treat equity infusions into unequityworthy companies as
grants given in the year the infusion was received. These infusions are non-recurring subsidies in accordance with section
351.524(c)(1) of the CVD Regulations. Consistent with section 351.524(d)(3)(ii) of the CVD Regulations, because
USIMINAS, COSIPA and CSN were uncreditworthy in the relevant years (the years the equity infusions were received), we
applied a discount rate that takes into account the differences between the probabilities of default of creditworthy and
uncreditworthy borrowers. From the time USIMINAS, COSIPA and CSN were privatized, we have been following the
methodology outlined in the "Changes in Ownership" section above to determine the amount of each equity infusion
attributable to the companies after privatization. We continue to rely on this methodology except for the selection of the
discount rate as discussed above.
For CSN, we summed the benefits allocable to the POI from all equity infusions and divided by CSN's total sales during the
POI. For USIMINAS/COSIPA, we summed the benefits allocable to the POI from all of the equity infusions and divided this
amount by the combined total sales of USIMINAS/COSIPA during the POI. On this basis, we determine the net subsidy to
be 5.75 percent ad valorem for CSN and 6.16 percent ad valorem for USIMINAS/COSIPA.
B. GOB Debt-for-Equity Swaps Provided to COSIPA in 1992 and 1993
Prior to COSIPA's privatization, and on the recommendation of a consultant who examined COSIPA, the GOB made two
debt-for-equity swaps in 1992 and 1993. We previously examined these swaps and determined that they were not
consistent with the usual investment practices of private investors; constituted a financial contribution within the meaning
of section 771(5)(D) of the Act; and, therefore conferred benefits on COSIPA in the amount of each conversion. See
Brazil Hot-Rolled Final, 64 FR at 38747. These debt-for-equity swaps are specific within the meaning of section
771(5A)(D)(i) of the Act because they were limited to COSIPA. Accordingly, we preliminarily determined that the GOB
debt-for-equity swaps provided to COSIPA in 1992 and 1993 are countervailable
subsidies within the meaning of section 771(5) of the Act. See Preliminary Determination, 64 FR at 53337. No
party has provided any new information or argument which would lead us to reconsider this determination.
Each debt-for-equity swap constitutes an equity infusion in the year in which the swap was made. As such, we have treated
each debt-for-equity swap as a grant given in the year the swap was made in accordance with section 351.507(b) of the
CVD Regulations. Further, these swaps, as equity infusions, are non- recurring in accordance with section 351.524(c)(1) of
the CVD Regulations. Because COSIPA was uncreditworthy in the years of receipt, we applied a discount rate consistent
with section 351.524(d)(3)(ii) of the CVD Regulations as discussed in the "Discount Rates" section above. Since COSIPA has
been privatized, we followed the methodology outlined in the "Changes in Ownership" section above to determine the
amount of each debt-for-equity swap attributable to the company after privatization. We divided the benefit allocable to
the POI from these debt-for-equity swaps by the combined total sales of USIMINAS/COSIPA. On this basis, we determine
the net subsidy to be 4.44 percent ad valorem for USIMINAS/COSIPA.
C. GOB Debt-for-Equity Swaps Provided to CSN in 1992
Prior to CSN's privatization, and on the recommendation of a consultant
who examined CSN, in 1992, the GOB converted some CSN debt into GOB equity in CSN. In this investigation, we initiated
on this debt-for-equity swap as a straight equity infusion (see Initiation Notice 64 FR 34204), but subsequent to our
initiation, in the Brazil Hot-Rolled Final, we determined that it constituted a debt-for-equity swap (64 FR at 38748).
In the Brazil Hot-Rolled Final , we determined that this swap was not consistent with the usual investment practices
of private investors and therefore conferred countervailable benefits on CSN in the amount of the swap. See Id. Thus, we
preliminarily determined that, pursuant to sections 771(5)(D) and (E)(i) of the Act, this debt-for-equity swap constitutes a
financial contribution which confers a benefit in the amount of the swap (see "Equityworthiness" section above). This
debt-for-equity swap is specific within the meaning of section 771(5A)(D) of the Act because it is limited to CSN.
Accordingly, we preliminarily determined that the GOB debt-for-equity swap provided to CSN in 1992 is a countervailable
subsidy within the meaning of section 771(5) of the Act. See Preliminary Determination, 64 FR at 53337. No
parties have provided any new information or argument which would lead us to reconsider this determination.
This debt-for-equity swap constitutes an equity infusion in the year in which the swap was made. As such, we have treated
this debt-for-equity swap as a grant given in the year the swap was made in accordance with section 351.507(b)
of the CVD Regulations. Further this swap, as an equity infusion, is non- recurring in accordance with section 351.524(c)(1)
of the CVD Regulations. Because CSN was uncreditworthy in the years of receipt, we applied a discount rate consistent with
section 351.524(d)(3)(ii) of the CVD Regulations as discussed in the "Uncreditworthy Rate" section above. Since CSN has
been privatized, we followed the methodology outlined in the "Changes in Ownership" section above to determine the
amount of the debt-for-equity swap attributable to the company after privatization. We divided the benefit allocable to the
POI from the equity infusion by CSN's total sales during the POI. On this basis, we determine the net subsidy to be 1.39
percent ad valorem for CSN.
II. Program for Which the Investigation Was Rescinded
Negotiated Deferrals of Tax Liabilities
In Preliminary Determination (64 FR at 53338), we rescinded our investigation of tax deferrals negotiated by
COSIPA and CSN which petitioners had alleged provided them with countervailable subsidies. Our rescission was based on
the Department's then-recent final determination that this program is not countervailable. See Brazil Hot-Rolled
Final, 64 FR at 38748-38749; Memorandum to the File, Countervailing Duty Investigation of Certain Cold-Rolled
Flat- Rolled Carbon-Quality Steel Products from Brazil, August 2, 1999, on file in CRU.
Interested Party Comments
Comment 1: Privatization
Respondents argue that 19 U.S.C. 1677(5)(B) and Article 1.1. of the WTO Agreement on Subsidies and Countervailing
Measures (SCM) require the Department to find that there is a financial contribution which confers a benefit before
concluding that there is a countervailable subsidy. Because, according to respondents, the statute plainly requires the
Department to examine, on a continuing basis, the contribution, the benefit and the causal
*5548
connection between the two, respondents argue that it is insufficient to identify a financial contribution, made in the past,
to a company owned by the government, and then presume irrebuttably that this contribution confers a benefit to the
company after it has changed ownership. Rather, the Department must analyze all subsequent events (including changes in
ownership, dividends received, and corporate restructurings) in order to determine how and whether prior financial
contributions could benefit the companies and products under investigation.
Respondents cite the Department's practice of recognizing the cessation of subsidies when a countervailable grant is
subsequently returned to the government or a countervailable loan is fully repaid, both "subsequent events" which
extinguish the subsidy. Respondents characterize privatization as another such "subsequent event" which must be
considered in examining whether a privatized company benefits from pre-privatization subsidies. Respondents argue that
the preliminary determination itself, with its "payback" analysis, concedes that privatization disrupts the required
causal connection between the financial contribution and the benefit. Furthermore, respondents claim that the
Department cannot use the stated lack of an obligation to consider the effect of every subsidy in determining whether a
countervailable benefit exists (i.e., to conduct an "effects test") as an excuse for failing to consider the subsequent events in
these circumstances. Respondents state that their position is not premised on requiring an analysis of the effects of all
subsidies in all circumstances, but rather on a less burdensome reading of the statute and the SCM that requires
consideration of whether a certain limited universe of "significant events" subsequent to a subsidy may eliminate the
benefits of that subsidy (consistent with long-standing practice as discussed above). Any other reading of the statute,
according to respondents, renders 19 U.S.C. 1677(5)(F) an unnecessary amendment of the law.
Respondents further argue that the proper consideration of a "subsequent
event" in this case, the arm's-length privatization of the companies, would necessarily lead to the conclusion that
pre-privatization subsides were eliminated. Without an analytical basis to believe or presume that subsidies have been
passed through after an arm's length transaction, respondents believe the Department must conclude that the
post-privatization owners do not benefit from pre-privatization subsidies. Respondents rely on the example of Company A
which purchases a machine with government assistance and then sells the machine to Company B at market price to
illustrate that the benefit of the government assistance remains with Company A; there is no pass-through of advantage or
benefit to Company B or the products it may produce with the machine. The same conclusion is necessary when Company
B purchases all of the assets and liabilities of (government-owned) Company A. The new owner does not enjoy any
advantage. Respondents purport that the owners of a company and their relationship with the assets of the company are
critical to any analysis of whether a company has received any benefit from some past financial contribution; when the
owners change in an arm's-length privatization, an important dynamic within the company is altered and the entire
company changes. Because the Department has overlooked the relevance of the new post- privatization owners,
respondents conclude that the analysis is necessarily incomplete.
Respondents further note the changes in ownership and control which
resulted from the privatizations of all three companies, and argue that the manner in which the new controlling owners
acquired their interests in the companies (arm's-length transactions) preclude the new owners from enjoying any benefit or
unfair advantage. Respondents cite the preamble of the CVD Regulations which state that "where a firm does not pay less
for its inputs than it would have to pay * * * as a result of a government financial contribution, it would be very difficult to
contend that a benefit exists" (63 FR at 65361) and argue that because the new owners did not pay less when they acquired
the companies, it is "difficult to contend that a benefit exists."
Finally, respondents note that the fact the GOB retained some residual or indirect interest in the privatized companies does
not preserve prior subsidies or convey new subsidies to the respondent companies. Nor does it undermine respondents'
conclusion that the new owners and companies did not enjoy any advantage or benefit from pre-privatization subsidies
during the POI.
Petitioners note that respondents' arguments are identical to those respondents made, and the Department rejected, in the
Brazil Hot-Rolled Final. According to petitioners, respondents have neither addressed the bases for the Department's
previous rejection of these arguments nor provided any new argument or information which would warrant a change in the
Department's response to these arguments.
Department's Position: We disagree with respondents. In accordance with the
statute (sections 771(5)(B) and 771(5)(E) of the Act), the Department has found that COSIPA, CSN and USIMINAS continue
to benefit from pre-privatization equity infusions. We have examined the facts of this case in light of the above-cited
provisions and find that the methodology we follow is in accordance with the Act. As petitioners noted, the Departments'
privatization/change-in-ownership methodology has been upheld by the Courts regardless of the amendments to the Act
by the URAA. See Saarstahl AG v. United States, 78 F.3d 1539 (Fed. Cir. 1996) (Saarstahl II); Inland Steel Bar Co. v. United
States, 86 F.3d 1174 (Fed. Cir. 1996) (Inland II); and, Delverde SrL v. United States, 24 F. Supp. 2d 314 (Ct. Int'l Trade
1998) (Delverde II).
The Department has satisfied both 19 U.S.C. 1677(5)(B) (section 771(5)(B) of the Act) and Article 1.1. of the SCM in this
investigation. We found that the GOB provided financial contributions to respondents, in the form of equity infusions and
debt-for-equity conversions in the above-mentioned years which conferred countervailable benefits through the POI. In
accordance with the Department's standard methodology, the benefits from these subsidies were allocated over time.
Neither of the above-mentioned provisions requires the Department to revisit these determinations.
Under both the SCM and the Act, the Department has the discretion to determine the impact of a change in ownership on
the countervailability of past subsidies. The Department has consistently applied its privatization/change-
in-ownership methodology to determine the impact that a privatization/change in ownership has on pre-privatization
subsidies. However, we have not done this by re-identifying or re-valuing the benefit of the subsidy based on events as of
the time when the ownership of the subsidized company changed. The Department identifies and values the subsidy as of
the time of the subsidy bestowal and does not revisit this determination. As petitioners correctly note, the
Department is not required to examine the effects of subsidies, i.e., trace how benefits are used by companies and whether
they provide competitive advantages. Instead, the Department's methodology addresses the impact of the change in
ownership on the allocation of pre-privatization subsidies. The Department's methodology accounts for the impact that the
change in ownership
*5549
has on the measurement of the benefit from pre- privatization subsidies, by allocating, or apportioning, subsidies between
the buyer and the seller, as reflected by the purchase price. As the Department said in Stainless Steel Plate in Coils from
Italy, "[o]ur methodology recognizes that a change in ownership has some impact on the allocation of previously-bestowed
subsidies and, through an analysis based on the facts of each transaction, determines the extent to which the subsidies pass
through to the buyer." 64 FR at 15518. Thus, our methodology is wholly consistent with 19 U.S.C. 1677(5)(F) (section 771
(5)(F) of the Act) and, contrary to respondent's argument, provides the analytical basis for determining whether and to
what extent subsidies have passed through to the privatized company or remain, in whole or in part, with the seller.
In addition, we remind respondents that section 701(a)(1) of the Act directs the Department to determine whether a
countervailable subsidy is being provided "with respect to the manufacture, production, or export of a class or kind of
merchandise." We note that the same terminology is also reflected in the SCM (Article 10, footnote 36). Given this focus on
the manufacture, production, and/or exportation of merchandise, the focus of the inquiry here should not be on the new
owners of the company and how they may or may not have benefitted from the privatization transaction. Instead, as
provided for in section 701(a)(1) of the Act and in Article 10, footnote 36 of the SCM, we have focused on the activities of
the company, rather than its ownership structure. Our privatization methodology has accounted for the change in the
ownership of the company conducting these activities. Thus, we have measured the amount of the benefit that passes
through this transaction as respondent companies continued to manufacture, produce and export subject merchandise.
In addition, respondents' reliance on the discussion of inputs in the preamble of the CVD Regulations is misplaced.
Contrary to the suggestion in respondents' argument here, the regulations' discussion of inputs does not reflect any change
in the Department's approach to the identification of a "benefit" under Section 771(5)(B). Rather, it simply reflects the
Department's longstanding practice of identifying the "benefit" as of the time of the subsidy bestowal, which, in the input context, is when
the input was provided by the government. It is true that the Department will look at whether the firm paid what the input
was worth, but the more fundamental point is that this method of identifying the benefit is based solely on events as of the
time of the subsidy bestowal. It is not based in any way on an analysis of post- subsidy bestowal events or how the market
value of the subsidy may have changed in the years following the subsidy bestowal.
Finally, we note that we have properly analyzed the GOB's residual and indirect interests in companies during the POI in the
context of our standard privatization methodology. We have not considered shares bought by government- owned
companies in privatization auctions as privatizations; these transactions do not reflect the change in ownership of the
shares from government to private ownership, but rather a transfer from one government holding to another. However,
when such companies were themselves privatized, we have made adjustments to reflect the changes in ownership at that
time.
Comment 2: Impact of WTO Panel Decision on Privatization
Respondents argue that U.S. law and international obligations require the Department to incorporate the holdings of the
recent WTO panel report on privatization in all subsequent proceedings involving privatization issues. The WTO panel reviewing three recent
administrative reviews of the countervailing duty order on hot-rolled lead and bismuth carbon steel products
from the United Kingdom issued a preliminary report (which was not public) attacking the Department's
determination that subsidies bestowed prior to the privatization of a government-owned company pass through to
the privatized company. Essentially, according to respondents, the WTO panel concluded that all prior subsidies are
extinguished by a privatization achieved through an arm's length transaction. Further, according to respondents, the panel
decision indicates that the Department's long-standing approach to privatization is inconsistent with the principles and
obligations of the SCM. Respondents cite the Charming Betsy doctrine (see Murray Schooner v. Charming Betsy, 6 U.S. (2
Cranch) 64, 118 (1804)), for the proposition that an act of Congress should not be construed to violate international
obligations if any other possible construction remains. Respondents further note that under the WTO, a panel report is a
"clarification" of the principles embodied in a WTO Agreement, and therefore, to the extent a WTO panel report identifies an
inconsistency between the practice of a WTO Member and a WTO Agreement, the report informs the Member how it must
adjust its practice to conform with its existing international obligations under the agreement. Respondents argue that to
the extent the panel report identifies inconsistencies between U.S. practice and the SCM, the United States is obligated to address those inconsistencies in general; any Department decision
subsequent to the panel report that does not reflect the panel's interpretations of the SCM will be inconsistent with U.S.
obligations under the SCM. A failure to comport Department actions with the panel report, according to respondents,
would certainly result in a remand by a reviewing court.
Respondents note that, in response to the adverse panel report, as an alternative to incorporating the principles of the
report in its practice, the United States may, under WTO procedures, elect to compensate the European Union for the
nullification and impairment of its rights under the SCM. However, respondents urge the Department not to take this
course of action, arguing that the WTO panel's clarification of the rights and obligations of Members under the SCM will
remain, i.e., the U.S. will remain obligated to render its decisions under the countervailing duty law in accordance
with the panel report. Should the Department continue to issue decisions that conflict with the panel report, respondents
argue that the United States will remain vulnerable to a series of challenges that it has nullified and impaired the rights of
WTO Members. Finally, respondents note that the failure to implement the WTO report will be directly contrary to the
United States' strong position that the integrity of the WTO dispute resolution process can only be preserved by members'
compliance with panel rulings, however adverse.
Petitioners argue that the Department should disregard respondents' arguments as they are predicated on an interim and
confidential panel report. Petitioners cite the Final Affirmative Countervailing Duty Determination; Certain
Cut-to-Length Carbon-Quality Steel Plate from France, 64 FR 73277 (December 29, 1999) and Final Affirmative
Countervailing Duty Determination; Certain Cut-to-Length Carbon-Quality Steel Plate from Italy, 64 FR 73244
(December 29, 1999), wherein the Department stated "this was an interim (i.e., preliminary) confidential report. As
such, it is inappropriate for the parties or the Department to comment on it." Id. at 73271. Petitioners
*5550
further argue that even if the panel report were relevant to the current investigation, respondents' arguments about the
legal significance of the report are mistaken. First, petitioners argue that it is premature to discuss any implementation of
the panel report, which has not yet been circulated among WTO members (and which cannot be considered for adoption
until 20 days thereafter). Furthermore, petitioners note that the United States has the right to request that the report be
reviewed by the Appellate Body, and argue that the report itself may be riddled with errors and the Department should not
implement erroneous findings that remain subject to reversal on appeal.
Second, petitioners note that U.S. law expressly prohibits the implementation of the panel report in the instant
investigation. According to petitioners, the relevant statutory provision prohibits the amendment, rescission, or modification of regulations or practices found by
a panel or Appellate Body to be inconsistent with any of the Uruguay Round Agreements unless and until the appropriate
congressional committees have been consulted; the Trade Representative has sought advice from relevant private sector
advisory committees; the agency or department head has provided an opportunity for public comment on a proposed
modification through its publication in the Federal Register; the Trade Representative has submitted a report to the
appropriate congressional committees regarding the proposed modification; the Trade Representative and the agency
head have consulted with the appropriate congressional committees on the proposed contents of the final rule; and, the
final rule or other modification had been published in the Federal Register. See 19 U.S.C. 3533(g)(1). Thus, petitioners
conclude that it would be unlawful for the Department to change its practice with regard to privatization until the
statutorily mandated actions have been fulfilled.
Finally, petitioners argue that the panel report has no binding effect in U.S. law, dismissing respondents' interpretation of
the Charming Betsy doctrine. Petitioners state that respondents are mistaken in assuming the WTO panel report would
provide the basis for the Court of International Trade (CIT) to overturn a final determination in this investigation
that subsidies persist after privatization because case law shows that the Department may make its own
determination regarding U.S. international obligations, and the CIT will give deference to those
determinations, regardless of GATT or WTO panel reports to the contrary.
Department's Position: As a threshold matter, we disagree with respondents that our international obligations under the
SCM require a change in our approach to privatization in the instant case. Although the panel report has now been
circulated to all WTO Members and is no longer confidential, petitioners are correct in noting that unless and until the
panel report is adopted by the membership, the United States has no obligation with respect to the report. As of now, the
report has not been adopted. It is therefore premature to consider what obligations, if any, the report may impose on the
United States.
Even if it were not premature for the Department to reconsider our approach to privatization in light of the adverse panel
report, and it were otherwise appropriate to do so, we agree with petitioners that, under 19 U.S.C. 3533(g)(1), a "regulation
or practice may not be amended, rescinded, or otherwise modified in the implementation of such report unless and until"
the very specific statutory obligations therein provided are fulfilled.
Thus, we continue to determine that a portion of subsidies bestowed on a government-owned company prior to
privatization continues to benefit the production of the privatized company.
Comment 3: Valuation of Equity Infusion Benefits
Respondents argue that the Department's practice of treating equity infusions into unequityworthy companies like grants
necessarily overstates the benefits of such infusions and, contrary to 19 U.S.C. 1671(a), results in the Department
countervailing more than the net benefits actually received by the company. Respondents maintain that the Department's
methodology fails to recognize the basic differences between equity investments and grants: Grants are unaccompanied by
financial obligations; equity investments are accompanied by the obligations to generate a return (i.e., to pay dividends)
and to cede a claim on the company's assets to the investor. Respondents argue that, in examining government equity
investments, the Department must measure the degree to which the firm is relieved of these two obligations. Respondents
note that in examining other forms of subsidization, the Department recognizes the ability of a company to offset
completely the benefits of the subsidy, for example, by adjusting the interest rate upward on a loan at a preferential
interest rate until it reaches parity with market rates. Respondents concede that it may be reasonable to treat the equity
infusions as grants in a case in which there were demonstrably no costs to the company receiving the equity, but argue that
there is no basis in law or fact for the Department's irrebuttable presumption that unequityworthy companies incur absolutely no costs in connection with government investments.
If the Department persists in treating equity infusions like grants, respondents argue for a change in methodology in which
the Department recognizes all post-equity infusion events, including privatization; increases in net worth; and, the
payment of dividends to the investor prior to the end of the POI. Only by "netting out" these identifiable and related costs,
respondents argue, can the Department comply with its statutory mandate not to countervail more than the net benefit.
Petitioners again note that respondents' arguments with respect to equity methodology are identical to those considered
and rejected by the Department in the Hot-Rolled Steel Final. Petitioners maintain that respondents have ignored the
Department's reasoning in the Hot-Rolled Steel Final and, thus, have presented no reason for the Department change
that reasoning.
Department's Position: As they did in the Hot-Rolled Steel Final, respondents are once again basically arguing a return
to the "rate of return shortfall" methodology (RORS), which the Department rejected in 1993 because it relied on an ex post
facto analysis of events and represented a cost-to-government analysis of the benefit. The Department instead determined
that the grant methodology was the most appropriate for analyzing the benefit from an equity infusion into an
unequityworthy company. As the Department said in the GIA, 58 FR at 37239:
The Department has consistently applied the grant methodology to
*5551
measure the benefit from equity infusions into unequityworthy companies since 1993. See, e.g., Certain Steel from
Brazil; Final Affirmative Countervailing Duty Determination: Grain-Oriented Electrical Steel from Italy, 59
FR 18357 (March 18, 1994); Final Affirmative Countervailing Duty Determination: Steel Wire Rod from
Venezuela, 62 FR 55014 (October 22, 1997); and Final Affirmative Countervailing Duty Determination; Stainless
Steel Plate in Coils from Belgium, 64 FR 15567, 15569 (March 31, 1999). This methodology has been upheld by the Court.
See British Steel plc v. United States, 879 F. Supp. 1254 (CIT 1995) (British Steel I). Respondents' argument that equity
investments impose additional costs on companies is not relevant and has been rejected by the Court. We have found
respondents to be unequityworthy as discussed in the "Equityworthiness" section above. This finding has not been disputed
by respondents. Our finding of unequityworthiness is akin to saying that private investors would not have invested capital
in the firm. Therefore, we have continued to use the grant methodology to measure the benefit of equity infusions (and
debt-for-equity conversions), as discussed in the "Equity Methodology" section above.
Comment 4: Exchange Rate Issues
Respondents take issue with the exchange rates the Department used in the calculations for the preliminary
determination. While the Department used official monthly average exchange rates from the Central Bank of Brazil
to convert to dollars most of the equity infusions examined, the Department used daily exchange rates from the Dow Jones
Business Information Service to convert to dollars four of the equity infusions examined. Respondents argue that the
Department's use of the Dow Jones rates is both inaccurate and inconsistent and the Department should use the official
Central Bank of Brazil exchange rates (which respondents have provided in their questionnaire responses) for all
currency conversions. Respondents cite an example of a daily exchange rate for
which the Dow Jones rate differs by nearly twenty percent from the Central Bank rate, resulting in overstating the dollar
value of the relevant equity infusion. Furthermore, respondents note that an official Central Bank rate is intrinsically
superior for the purposes of a countervailing duty proceeding, and is more consistent in that the Department is
using Central Bank monthly average rates for most of the currency conversions in the calculations.
Petitioners argue that respondents have provided no reason for the Department to doubt the reliability of the Dow Jones
data, and therefore no reason to change the interest rates used in the calculations.
Department's Position: For the calculations for the preliminary determination, we used the monthly average
exchange rates provided in the questionnaire responses, published in the Suma Economica, and sourced from the Central
Bank of Brazil. Where we used daily exchange rates, the data provided by respondents did not meet our needs:
although it came from the same source, it was not clear whether the exchange rates provided were "buy" or "sell" rates, or
an average of the two. Since the Department uses an average of the "buy" and "sell" rates, we sought and used another
source for that data, the exchange rates maintained on Import Administration's web site. For this final
determination, we have now identified and used another public source of the appropriate exchange rate data: the
Central Bank of Brazil's web site. As indicated in the calculation memorandum for these final results (on file in
CRU), daily exchange rate data is available from the Central Bank of Brazil back to 1985. We used this data to calculate
the average of the "buy" and "sell" rates, and also to calculate the monthly average exchange rates we used. Exchange rate
data for 1984 was unavailable from the Central Bank's web site; for 1984 we used the exchange rate data reported by
respondents, which is published in the Suma Economica and sourced from the Central Bank of Brazil.
Comment 5: Repayment Calculations
Respondents argue that the gamma ratio used in the Department's privatization methodology does not properly reflect the
proportion of the purchase price that represents repayment of prior subsidies; they maintain that an average of infusion
values to net worth ratios over time does not provide a meaningful ratio. Respondents instead suggest comparing the
present value of the unamortized pre-privatization infusions (at the time of the infusion) to the total net worth of the
company at the time of privatization. They hold that this approach more properly accounts for the difference between a
company that received an infusion ten years prior to subsidization from a company that receives the same infusion the
year before privatization.
Once again, petitioners note that respondents have forwarded the same arguments considered and rejected by the
Department in Brazil Hot-Rolled Steel Final. According to petitioners, respondents have not provided any reason for the Department to deviate from the position
articulated at that time.
Department's Position: As we did in the Brazil Hot-Rolled Steel Final and for this final determination, we have
continued to calculate gamma using historical subsidy and net worth data. The gamma calculation serves as a reasonable
estimate of the percent that subsidies constitute of the overall value of the company. This methodology has been upheld by
the courts in Saarstahl II, Delverde II, and British Steel plc v. United States, 929 F. Supp. 426, 439 (CIT 1996).
Respondents' criticism of the Department's current methodology centers on their belief that the average of subsidies to net
worth does not take into account the timing of the receipt of subsidies and the corresponding net present value of the
subsidies. We note that while gamma itself does not factor in the net present value of the subsidies, the results of the gamma
calculation are applied to the present value of the remaining benefit streams at the time of privatization. Thus, our current
calculations, as a whole, do account for the present value of the remaining benefits at the time of privatization.
Comment 6: Adjustments to Purchase Prices in Privatizations
Respondents argue that the Department incorrectly adjusted the purchase prices
downward to account for both the use of privatization currencies and the acquisition of shares by CVRD. Respondents
argue that the relevant value of the currencies, in identifying the purchase price of the companies, is the present value of
the currencies, the amount at which the currencies were accepted by the GOB. Respondents hold that this value is correct
because it represents the value of the debt that the GOB retired through the sales. Further, the GOB had a real liability equal
to the present value of the instrument and the value of this liability, retired through the transaction, must be used in the
calculation as it attempts to identify the amount of subsidy "paid back" to the government in the privatization. Respondents
state that the value of the privatization currencies to the purchasers of the shares is irrelevant. They provide examples of
different currency exchange rates and different bond values to illustrate the point that the value to the GOB remains the
same in each scenario. In short, respondents note that when measuring the value of subsidies, the Department focuses
exclusively on the value of the subsidy to the recipient, at
*5552
the time the subsidy is received. Thus, respondents urge the Department to focus, in this instance, on the value received by
the government, i.e., the present value of the privatization currencies used to purchase privatized companies; it is the
perspective of the recipient that is consistently relevant.
In addition, respondents note that in Certain Steel from Brazil, the Department examined the privatization of USIMINAS, was aware of the secondary market trading of the privatization
currencies, and did not adjust USIMINAS's purchase price. Therefore, respondents argue, the hot-rolled steel
investigation represented a departure from the Department's earlier approach, a departure which was not adequately
explained and which does not now provide the basis for the adjustment to purchase price.
Finally, respondents disagree with the treatment of shares purchased by CVRD in the privatizations. Respondents state that
CVRD's share purchases were made on commercial terms, a fact which is supported by the participation of other private
investors in those privatization auctions, and thus the purchase price should not be discounted for CVRD's participation.
Respondents note that the verification reports reinforce this conclusion and state they cannot be penalized for a GOB
investment made on terms consistent with commercial considerations.
Petitioners support the Department's preliminary adjustments to account for the market value of privatization
currencies. Petitioners state that record evidence demonstrates that the currencies traded at deep discounts from their
face values on secondary markets. Petitioners state that the statute and practice reveal a strong preference for using
market-determined prices to make valuation decisions. They hold that because the GOB could purchase the securities on
the secondary market, just like any private investors, the value
to the GOB was exactly the same as the market value.
Department's Position: As a threshold matter, respondents' arguments are identical to those considered and rejected by the
Department in the Brazil Hot- Rolled Final (64 FR at 38751). With no new arguments to consider (and no new
information developed in the course of this investigation), we continue to view respondents' arguments regarding the
valuation of privatization currencies as flawed. Respondents are correct in noting that the GOB retired debts equal to the
present value of the currencies accepted in exchange for shares. However, that fact is not relevant to our analysis of the
purchase price in the privatization transaction; the proper value of the purchase price to use in the privatization
calculation is the market selling price of the company. Since the purchase price was partially accounted for by
privatization currencies and those currencies were discounted on secondary markets, the market selling price of the
company is partially composed of the market value of the privatization currencies. As we stated in the Brazil
Hot-Rolled Final, to use the present value of the currencies when determining the purchase price would be to overstate
the cash, market value of the purchase price. As petitioners correctly point out, it is the Department's preference to use
market values in calculations where possible. The discounted value accurately represents the market value of the
currencies, and therefore the price paid by participants in the privatization auctions. That the GOB accepted those
currencies at present value is irrelevant to our analysis of the purchase price. With respect to respondents' argument about our examination of
the currencies in Certain Steel from Brazil, we reiterate the point articulated in the Brazil Hot-Rolled Final (64 FR
at 38751). While the fact that privatization currencies were used to acquire USIMINAS shares was documented in the
record of that case, the parties did not have the opportunity to comment on the final privatization methodology applied
and the implications that various facts in evidence may have had on this methodology. Furthermore, in Certain Steel from
Brazil, and the companion cases, the Department developed its privatization methodology, and applied it for the first
time in the final determinations. We have gained experience with the methodology since that time. In this
investigation, we have properly determined that privatization currencies were overvalued by the GOB and that the
discounted, market value should be used in the privatization calculation as discussed above. We have used the discounted
value best supported by record evidence.
Finally, we disagree with respondents with respect to the treatment of CVRD share purchases. Government purchases of
government assets cannot be seen properly as a "privatization" or "change in ownership" that would give rise to a
reallocation of subsidies between buyer and seller. Instead, these transactions represent a transfer of government funds
from one account to another. Thus, we have continued to remove the CVRD purchases from the
calculation as discussed above. In addition, we note that we have accounted for the 1997 partial privatization of CVRD in
the calculations.
Comment 7: Not All Privatization Currencies Used in Privatizations Were Acquired at Discounted Prices
Respondents argue that the Department's valuation of the privatization currencies mistakenly assumes that all currencies
were acquired by the users on the secondary market at a discount. They point to the Privatization Certificates (CPs), which
banks were forced to purchase under the Collar Plan for 100 percent of their value, and SIDERBRAS debentures which
SIDERBRAS creditors were given in lieu of receiving debt payment. Respondents state that many banks chose to use the
CPs in privatization auctions, as holders of other privatization currencies also did, exchanging one-to-one for shares,
rather than trade them on the secondary market. They maintain that if instruments used in privatization auctions were not
actually acquired on the secondary market, a secondary market discount cannot be applied. Similarly, even if the
instruments were trading in a secondary market at a premium, respondents argue, no adjustment for market value would
be appropriate. Thus, respondents argue, there is no basis for the Department to assume that all currencies used in the
privatization auctions were acquired at discounts on the secondary market and
information in the record indicates that some of the currencies were either used by their original owners who had come by
them as a result of the GOB's debt restructuring plan or borrowed on commercial terms from BNDES (the GOB development
bank); to continue to adjust the purchase price for the secondary market discounts is to apply an adverse inference without
justification.
Petitioners believe that to focus on the acquisition price of the privatization currencies is to focus on the wrong moment in
time. The relevant question, according to petitioners, is not what price was paid in the past to acquire the currencies, but
what were the currencies worth at the time they were used to make purchases in the GOB privatization auctions.
Department's Position: As discussed in the previous comment, the appropriate measure of the value of the privatization
currencies is not their cost to their holders at the time of acquisition (be that at the time the original instruments were
issued, when they were acquired on the secondary market, or when they were borrowed
*5553
from another holder), but their value in the secondary market at the same time they were used in privatization auctions.
This represents the value that the holders could have realized, in the alternative, through a commercial transaction at the
time of the privatization auctions. The secondary market provides the commercial "benchmark" for evaluating whether the
value the GOB attributed to the currencies was appropriate, and whether the purchase price represents something with a
comparable market value. The secondary market discounts which are supported on the record indicate that the GOB
overvalued the currencies in the privatization auctions and that the purchase price is tainted by the GOB's overvaluation.
We agree with petitioners that the statute expresses a preference for using market-determined prices when examining
government actions, and we have appropriately examined the respondents' purchase prices through the lens of the
discounted secondary market trading in privatization currencies.
Comment 8: Asymmetrical Comparisons in the Gamma Calculations
Respondents urge the Department to correct the gamma calculation to overcome the asymmetry inherent in ratios which
mix the use of historical figures and figures corrected for inflation, i.e., the numerators and denominators should be
expressed in the same terms. They argue that the Department can correct this inaccuracy by ensuring that the ratios are
expressed in the same terms, and recommend accomplishing this by converting to dollars the numerators and
denominators.
Petitioners argue that the asymmetry results from respondents having reported unusable data. Petitioners note that
respondents' proposed correction works entirely to respondents' advantage by resulting in a higher repayment ratio.
Petitioners note that in accordance with CIT rulings, respondents are not
entitled to benefit from their failure to satisfy the Department's requests for information; thus for any year in which the
Department does not have the appropriate information, petitioners urge the Department to assume the ratio is zero.
Department's Position: We agree, in part, with respondents and petitioners. In calculating the gamma ratio, we would
prefer to compare historical subsidies with historical net worth, or indexed subsidies with indexed net worth. For purposes
of the preliminary determination, we used the same information that we used in the Brazil Hot-rolled Final.
In that case, we had some years for which the data was symmetrical and some years for which we only had historical
subsidies and indexed net worth. Since the preliminary determination, we have reexamined the financial
statements on the record, and have found that for a number of additional years, the financial statements do provide an
inflation- adjusted subsidies value. Therefore, we have been able to calculate a symmetrical comparison for the following
years: for USIMINAS and COSIPA for the relevant years from 1988 (except 1992 for COSIPA) forward and for CSN from
1987 forward (except 1992). For all other years, we have continued to calculate the gamma ratios as we did in the
preliminary determination. We agree with petitioners that respondents have not demonstrated that their proposed
modification yields a more symmetrical or accurate comparison in the gamma ratios than the ratios we calculated for the
preliminary determination.
However, we disagree with petitioners that we should adversely assume that the ratio is zero since for all of the years, we
have information on either historical or indexed subsidy values and net worth.
Comment 9: Corrections Made at Verification
Respondents contend that the Department's calculations for this final determination should include the corrected
POI sales figures which were presented and verified at verification. The figures which were corrected were: the USIMINAS
total sales value; the volume and value of COSIPA exports of subject merchandise to the United States; and, the volume and
value of CSN total sales and the value of CSN exports of the subject merchandise to the United States.
Department's Position: We agree with respondents and have used the corrected figures in our calculations for this final
determination. The Department normally accepts minor corrections to submitted information at verification, and
the opportunity to make minor corrections was included in the verification outlines that were used to prepare for
verification. The corrected figures were verified in accordance with our standard verification procedures; thus, we have
used them in the calculations.
Verification
In accordance with section 782(i) of the Act, we verified the information used in making our final determination. We
followed standard verification procedures, including meeting with the government and company officials, and examining
relevant accounting records and original source documents. Our verification results are outlined in detail in the public
versions of the verification reports, which are on file in the CRU.
Suspension of Liquidation
In accordance with section 703(d)(1)(A)(i) of the Act, we calculated a combined ad valorem rate for USIMINAS and
COSIPA and an individual rate for CSN. The total estimated net countervailable subsidy rates are stated below.
-----------------------------------
In accordance with our preliminary affirmative determination, we instructed the U.S. Customs Service to
suspend liquidation of all entries of cold-rolled flat-rolled carbon-quality steel products from Brazil which were
entered, or withdrawn from warehouse, for consumption on or after October 1, 1999, the date of the publication of our
preliminary determination in the Federal Register. In accordance with section 703(d) of the Act, which provides
that suspension ordered after the preliminary determination may not remain in effect for more than four months,
we will instruct the U.S. Customs Service to discontinue the suspension of liquidation for merchandise entered on or after
January 29, 2000 but to continue the suspension of liquidation of entries made between October 1, 1999 and January 29,
2000.
We will reinstate suspension of liquidation under section 706(a) of the Act if the ITC issues a final affirmative injury
determination, and will require a cash deposit of estimated countervailing duties for such entries of
merchandise in the amounts indicated above.
ITC Notification
In accordance with section 705(d) of the Act, we will notify the ITC of our
determination. In addition, we are making available to the ITC all non- privileged and non-proprietary information
related to this investigation. We will allow the ITC access to all privileged and business proprietary information in our files
provided the ITC confirms that it will not disclose such information, either publicly or under an administrative protective
order, without the written consent of the
*5554
Assistant Secretary for Import Administration.
If the ITC determines that material injury, or threat of material injury, does not exist, this proceeding will be terminated
and all estimated duties deposited or securities posted as a result of the suspension of liquidation will be refunded or
canceled. If, however, the ITC determines that such injury does exist, we will issue a countervailing duty order.
Destruction of Proprietary Information
In the event that the ITC issues a final negative injury determination, this notice will serve as the only reminder to
parties subject to Administrative Protective Order (APO) of their responsibility concerning the destruction of proprietary
information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation of the APO.
This determination is published pursuant to sections 705(d) and 777(i) of the
Act.
Dated: January 18, 2000.
Robert S. LaRussa,
Assistant Secretary for Import Administration.
-------------------------------------
Thickness (mm) Roughness (<
-------------------------------------
t less than or =0.209 ........ Rz less than or =0.5
0.209@t less than or =0.310 .. Rz less than or =0.6
0.310@t less than or =0.440 .. Rz less than or =0.7
0.440@t less than or =0.560 .. Rz less than or =0.8
0.560@t ......... Rz less than or =1.0
-------------------------------------
Thickness: less than or =0.100 mm #7%
Width: 100 to 600 mm
----------------------------------------------------------------------
Element ...... C ....... Mn ....... P ....... S ....... Al ..... Fe
Weight % ... less than or =0.07 .. 0.2-0.5 .. less than or =0.05 .. less than or =0.05 .. less than or =0.07 . Balance
----------------------------------------------------------------------
----------------------------------------------
Hardness .......... Full Hard (Hv 180 minimum)
Total Elongation .. @3%
Tensile Strength .. 600 to 850 N/mm super2
----------------------------------------------
------------------------------------------------------
Surface Finish ....... less than or =0.3 micron
Camber (in 2.0 m) .... @3.0 mm
Flatness (in 2.0 m) .. less than or =0.5 mm
Edge Burr ............ @0.01 mm greater than thickness
Coil Set (in 1.0 m) .. @75.0 mm
------------------------------------------------------
Thickness: 0.024 inch #.0015 inch
Width: 33 to 45.5 inches
-------------------------------------------------------------------
Element ........... C ..... Mn ...... P ...... S ..... Si .... Al
Min. Weight % .. ....... ....... ....... ........ 0.65 .. ....
Max. Weight % ... 0.004 ... 0.4 ... 0.09 ... 0.009 . ........ 0.4
-------------------------------------------------------------------
----------------------------
Hardness .. B 60-75 (AIM 65)
----------------------------
-----------------------------------------------------------------------------
Finish ..................... Smooth (30-60 microinches)
Gamma Crown (in 5 inches) .. 0.0005 inch, start measuring inch from slit edge
Flatness ................... 20 I-UNIT max.
Coating .................... C3A-.08A max. (A2 coating acceptable)
Camber (in any 10 feet) .... 1/16 inch
Coil Size I.D............... 20 inches
-----------------------------------------------------------------------------
-------------------------------------------------------------
Core Loss (1.5T/60 Hz) NAAS ..... 3.8 Watts/Pound max.
Permeability (1.5T/60 Hz) NAAS .. 1700 gauss/oersted typical.
1500 minimum.
-------------------------------------------------------------
Thickness: 0.025 to 0.245 mm
Width: 381-1000 mm
-----------------------------------------------
Element ...... C ........... N .......... Al
Weight % ... @ 0.01 .. 0.004 to 0.007 . @ 0.007
-----------------------------------------------
******** This is piece 1. -- It begins at character 1 of table line 1. ********
*******************************************************************************
-------------------------------------------------------------------------
Element ...... C .... Mn ..... P ........ S ........ Si ........ Al .....
Min. Weight
% ........ 0.02 .. 0.20 . ....... ............ ........... 0.03 ....
Max. Weight
% ........ 0.06 .. 0.40 .. 0.02 ..... 0.023
(Aiming
0.018
Max.) ..... 0.03 .. 0.08 (Aiming
0.05) ....
-------------------------------------------------------------------------
*******************************************************************************
******* This is piece 2. -- It begins at character 74 of table line 1. ********
*******************************************************************************
.. As ..... Cu ...... B ....... N
....... ....... ......... 0.003
. 0.02 ... 0.08 .. ......... 0.008
(Aiming
0.005)
--------------------------------------
74...80....+...90....+....0....+...10.
Non-metallic Inclusions: Examination with the S.E.M. shall not reveal individual oxides >1 micron (0.000039 inch) and
inclusion groups or clusters shall not exceed 5 microns (0.000197 inch) in length.
Surface Treatment as follows:
The surface finish shall be free of defects (digs, scratches, pits, gouges, slivers, etc.) and suitable for nickel plating.
-----------------------------------------------------------
Roughness, RA Microinches (Micrometers)
-------------------------------------------
Aim Min. Max.
-----------------------------------------------------------
Extra Bright ........ 5 (0.1) ........ 0 (0) ...... 7 (0.2)
-----------------------------------------------------------
- Certain annealed and temper-rolled cold-rolled continuously cast steel, which meets the following characteristics:
-------------------------------------------------------------------------------
Element ...... C ..... Si ..... Mn ...... P ....... S ........ Al ........ N
Weight % ... @0.08 .. @0.04 .. @0.40 .. @0.03 . @0.030.0 . 0.010-0.025 @0.0025
-------------------------------------------------------------------------------
---------------------------------------------------------------
Thickness Tolerance ......................... #5 percent
Guaranteed inside of 15 mm from mill edges .. (aim #4 percent)
Width Tolerance ............................. -0/+7 mm
Hardness (Hv) ............................... Hv 85-110
Annealing ................................... Annealed
Surface ..................................... Matte
Tensile Strength ............................ @275N/mm super2
Elongation .................................. @36%
---------------------------------------------------------------
---------------------------------------------
Element .......... C ..... Mn .... P .... S
Max. Weight % ... 0.13 .. 0.60 .. 0.02 . 0.05
---------------------------------------------
-----------------------------------------------------------------------------
Base Weight ............ 55 pounds
Theoretical Thickness .. 0.0061 inch (+/-10 percent of theoretical thickness)
Width .................. 31 inches
Tensile Strength ....... 45,000-55,000 psi
Elongation ............. minimum of 15 percent in 2 inches
-----------------------------------------------------------------------------
******** This is piece 1. -- It begins at character 1 of table line 1. ********
*******************************************************************************
-------------------------------------------------------------------------
Element ...... C .... Mn ..... P ........ S ........ Si ........ Al .....
Min. Weight
% ........ 0.02 .. 0.20 . ....... ............ ........... 0.03 ....
Max. Weight
% ........ 0.06 .. 0.40 .. 0.02 ..... 0.023
(Aiming
0.018
Max.) ..... 0.03 .. 0.08 (Aiming
0.05) ....
-------------------------------------------------------------------------
1...+...10....+...20....+...30....+...40....+...50....+...60....+...70...
*******************************************************************************
******* This is piece 2. -- It begins at character 74 of table line 1. ********
*******************************************************************************
.. As ..... Cu ...... B ....... N
....... ....... ......... 0.003
. 0.02 ... 0.08 .. ......... 0.008
(Aiming
0.005)
--------------------------------------
74...80....+...90....+....0....+...10.
Non-metallic Inclusions: Examination with the S.E.M. shall not reveal individual oxides >1 micron (0.000039 inch) and
inclusion groups or clusters shall not exceed 5 microns (0.000197 inch) in length.
The surface finish shall be free of defects (digs, scratches, pits, gouges, slivers, etc.) and suitable for nickel plating.
Surface Finish
-----------------------------------------------------------
Roughness, RA Microinches (Micrometers)
-------------------------------------------
Aim Min. Max.
-----------------------------------------------------------
Stone Finish ....... 16 (0.4) ...... 8 (0.2) ..... 24 (0.6)
-----------------------------------------------------------
- Concast cold-rolled drawing quality sheet steel, ASTM a-620-97, Type B, or single reduced black plate, ASTM A-625-92,
Type D, T-1, ASTM A-625-76 and ASTM A-366-96, T1-T2-T3 Commercial bright/luster 7a both sides, RMS 12 maximum.
Thickness range of 0.0088 to 0.038 inches, width of 23.0 inches to 36.875 inches.
- Certain single reduced black plate, meeting ASTM A-625-98 specifications, 53 pound base weight (0.0058 inch thick) with
a Temper classification of T-2 (49- 57 hardness using the Rockwell 30 T scale).
- Certain single reduced black plate, meeting ASTM A-625-76 specifications, 55 pound base weight, MR type matte finish,
TH basic tolerance as per A263 trimmed.
- Certain single reduced black plate, meeting ASTM A-625-98 specifications, 65 pound base weight (0.0072 inch thick)
with a Temper classification of T-3 (53- 61 hardness using the Rockwell 30 T scale).
- Certain cold-rolled black plate bare steel strip, meeting ASTM A-625 specifications, which meet the following
characteristics:
Chemical Composition
---------------------------------------------
Element .......... C ..... Mn .... P .... S
Max. Weight % ... 0.13 .. 0.60 .. 0.02 . 0.05
---------------------------------------------
--------------------------------------------
Thickness ......... 0.0058 inch #0.0003 inch
Hardness .......... T2/HR 30T 50-60 aiming
Elongation ........ "15%
Tensile Strength .. 51,000.0 psi #4.0 aiming
--------------------------------------------
---------------------------------------------
Element .......... C ..... Mn .... P .... S
Max. Weight % ... 0.13 .. 0.60 .. 0.04 . 0.05
---------------------------------------------
------------------------------------------------------
Thickness ......... 0.0060 inch (#0.0005 inch)
Width ............. <=10 inches (+ 1/4 to 3/8 inch/-0)
Tensile strength .. 55,000 psi max.
Elongation ........ Minimum of 15 percent in 2 inches
------------------------------------------------------
- Certain cold-rolled steel sheet, whether coated or not coated with porcelain enameling prior to importation, which meets
the following characteristics:
Thickness (nominal): :0.019 inch
Width: 35 to 60 inches
Chemical Composition
----------------------------------------
Element ........... C ...... O ..... B
Max. Weight % ... 0.004 . ....... ....
Min. Weight % .. ........ 0.010 . 0.012
----------------------------------------
- Width: >66 inches
---------------------------------------------
Element .......... C ..... Mn .... P .... Si
Max. Weight % ... 0.07 .. 0.67 .. 0.14 . 0.03
---------------------------------------------
------------------------------------------
Thickness Range (mm) ......... 0.800-2.000
Min. Yield Point (MPa) ....... 265
Max Yield Point (MPa) ........ 365
Min. Tensile Strength (MPa) .. 440
Min. Elongation % ............ 26
------------------------------------------
Thickness: less than or = 1.31 mm
Width: less than or = 80 mm
-------------------------------------------------------------------------------
Element ...... C ........ Si ........ Mn ...... P ..... S ..... Cr ...... Ni
Weight % ... 1.2 to
1.3 .... 0.15 to
0.35 .... 0.20 to
0.35 ..... less than or =
0.03 . 0.007 . 0.3 to
0.5 ... less than or = 0.25
-------------------------------------------------------------------------------
Surface finish: Bright finish free from pits, scratches, rust, cracks, or seams
Smooth edges.
Edge camber (in each 300 mm of length): less than or = 7 mm arc height
Cross bow (per inch of width): 0.015 mm max.
- Certain transformation-induced plasticity (TRIP) steel, which meets the following characteristics:
------------------------------------
Element .......... C .... Si ... Mn
Min. Weight % ... 0.09 .. 1.0 . 0.90
Max. Weight % ... 0.13 .. 2.1 . 1.7
------------------------------------
------------------------------------------------------------------
Thickness Range (mm) ......... 1.000-2.300 (inclusive)
Min. Yield Point (MPa) ....... 320
Max Yield Point (MPa) ........ 480
Min. Tensile Strength (MPa) .. 590
Min. Elongation % ............ 24 (if 1.000-1.199 thickness range)
25 (if 1.200-1.599 thickness range)
26 (if 1.600-1.999 thickness range)
27 (if 2.000-2.300 thickness range)
------------------------------------------------------------------
-----------------------------------
Element .......... C .... Si .. Mn
Min. Weight % ... 0.12 .. 1.5 . 1.1
Max. Weight % ... 0.16 .. 2.1 . 1.9
-----------------------------------
------------------------------------------------------------------
Thickness Range (mm) ......... 1.000-2.300 (inclusive)
Min. Yield Point (MPa) ....... 340
Max Yield Point (MPa) ........ 520
Min. Tensile Strength (MPa) .. 690
Min. Elongation % ............ 21 (if 1.000-1.199 thickness range)
22 (if 1.200-1.599 thickness range)
23 (if 1.600-1.999 thickness range)
24 (if 2.000-2.300 thickness range)
------------------------------------------------------------------
-----------------------------------
Element .......... C .... Si .. Mn
Min. Weight % ... 0.13 .. 1.3 . 1.5
Max. Weight % ... 0.21 .. 2.0 . 2.0
-----------------------------------
------------------------------------------------------------------
Thickness Range (mm) ......... 1.200-2.300 (inclusive)
Min. Yield Point (MPa) ....... 370
Max Yield Point (MPa) ........ 570
Min. Tensile Strength (MPa) .. 780
Min. Elongation % ............ 18 (if 1.200-1.599 thickness range)
19 (if 1.600-1.999 thickness range)
20 (if 2.000-2.300 thickness range)
------------------------------------------------------------------
------------------------------------------------
Element ........... C ..... Mn ...... P .... Cu
Min. Weight% ... ....... ....... ....... 0.15
Max. Weight % ... 0.10 ... 0.40 ... 0.10 .. 0.35
------------------------------------------------
-------------------------------------------------------------------------
Thickness Range (mm) .......... 0.600-0.800
Min. Yield Point (MPa) ........ 185
Max Yield Point (MPa) ......... 285
Min. Tensile Strength (MPa) ... 340
Min. Elongation ............... 31 (ASTM standard 31% = JIS standard 35%)
-------------------------------------------------------------------------
------------------------------------------------
Element ........... C ..... Mn ...... P .... Cu
Min. Weight % .. ....... ....... ....... 0.15
Max. Weight % ... 0.05 ... 0.40 ... 0.08 .. 0.35
------------------------------------------------
----------------------------------------------------------------------
Thickness Range (mm) ......... 0.800-1.000
Min. Yield Point (MPa) ....... 145
Max Yield Point (MPa) ........ 245
Min. Tensile Strength (MPa) .. 295
Min. Elongation % ............ 31 (ASTM standard 31%=JIS standard 35%)
----------------------------------------------------------------------
-------------------------------------------------------------------------------
Element ..... C ... Si ... Mn ... P ... S ... Cu ... Ni ... Al .. Nb, Ti,
V, B ... Mo
Max. Weight
% ....... 0.01 . 0.05 . 0.40 0.10 0.023 0.15-
.35 .. 0.35 . 0.10 .. 0.10 .. 0.30
-------------------------------------------------------------------------------
------------------------------------
Thickness (mm): .. 0.7
Elongation %:" ... 35
------------------------------------
[u]sing the grant methodology for equity infusions into unequityworthy companies is based on the premise that an
unequityworthiness finding by the Department is tantamount to saying that the company could not have attracted
investment capital from a reasonable investor in the infusion year based on the available information. Thus, neither the
benefit nor the equityworthiness determination should be reexamined post hoc since such information could not
have been known to the investor at the time of the investment. Therefore, the grant methodology, when used for equity
infusions into unequityworthy companies * * * should not be adjusted based on subsequent events (e.g., dividends,
profits).
Company Net subsidy rate
-----------------------------------
IMINAS/COSIPA .. 10.60% ad valorem.
CSN ............ 7.14% ad valorem.
All Others ..... 9.21% ad valorem.
-----------------------------------